Transcodetrabajos

...an installation and configuration. If you have experience with red5, you will be hired. The project will be considered accomplished, if rtmp flash players can play the live stream from our shoutcast servers, trought the rtmp of our red5 server, and also the smartphones, without need to install and additional application on them; and out red5 server must be set up as it can not be used to transcode broadcasts from another shoutcast server, but ours. thanks in advance for considering the project. ----------------------------------------------------------------------------------------------- Necesitamos proveer transcodificación de audio con el codec aac plus desde shoutcast a traves de el servidor RTMP red5 de manera que los reproductores flash y los smartpho...

...Once connected the pipeline needs to prepare the stream for consumption by lower pipelines as below. Segment Pipeline Take the input stream and output HLS segment files which will be persisted to disk over NFS. It is important to note that we need a hook so that when the files are written we can send a notification message over the message broker announcing the segment file size, name, etc. Transcode Pipeline This child pipeline, when activated, is responsible for transcoding the input H.265 stream to H.264 to prepare it to be consumed over WebRTC. Requirements Solution must be implemented using golang. Solution must use the go-gst library for accessing gstreamer bindings. Code must be documented. Pipeline must be construct by code. Do NOT expect to take a pipeline strin...

...Once connected the pipeline needs to prepare the stream for consumption by lower pipelines as below. Segment Pipeline Take the input stream and output HLS segment files which will be persisted to disk over NFS. It is important to note that we need a hook so that when the files are written we can send a notification message over the message broker announcing the segment file size, name, etc. Transcode Pipeline This child pipeline, when activated, is responsible for transcoding the input H.265 stream to H.264 to prepare it to be consumed over WebRTC. Requirements Solution must be implemented using golang. Solution must use the go-gst library for accessing gstreamer bindings. Code must be documented. Pipeline must be construct by code. Do NOT expect to take a pipeline string a...

skilled ffmpeg expert to work on a live transcoding project. - CMS should be built in laravel. it should use nginx for hls streaming with user pass and ip restriction protection. it should have all encode decode options for h264 and h265 with cuda / nvenc encode /decode i have system wit 4x rtx quadro 4000 so the system should have also option to select from wich gpu wich channels are going to transcode. it should have realtime datalogics like incoming outgoing network metrics realtime each gpu utilization of encoder/decoder graphic based utilization of ram and cpu. page with show all live streams/offline streams with options restart stop delete edit buttons streams should show with realtime datas like uptime speed codec bitrate connected users on stream count. user managem...

...cpu and ram utilization with charts and number details 1.3 -> show network metric utilizations, incoming outgoing mbps/gbps charts 1.4 -> show all gpu's seperatly with utilization of status encoder / decoder, card status(heat fahrenheit celcius) total streams attached / active streams / disabled streams per gpu utilization graphic should be used by charts with graphics. - profile setup for transcode and select when create new live streams including select of gpu and posiblity for multi output like mainstream 1080p second stream 720p when streams are attached to a profile, it should be also auto change all metrics if the profile is changed to another video codec bitrate setup or attached to another gpu etc. - users overview: create edit delete user -> user authe...

Overview: We are seeking a skilled Django developer to enhance our video player project by adding video encoding for multiple resolutions and the generation of video thumbnails. The project aims to improve the user experience and optimize video playback on our platform. Project Goals: Video Encoding: Implement a system that can transcode uploaded videos into multiple resolutions (e.g., 720p, 480p) to support adaptive streaming and ensure smooth playback on various devices and network conditions. Thumbnail Generation: Develop a feature that automatically generates video thumbnails at specific intervals or allows users to select custom thumbnail frames for their videos. User-Friendly Interface: Integrate these functionalities seamlessly into our existing Django-based video player ...

I am looking for a freelancer who can help me customize FFmpeg for my project that uses ffmpeg to transcode *.mp4 files into different resolutions whenever a user uploads a video. But once the transcoding is completed it automatically delete the input (original) file. I want to keep the original file. I need someone who can customize the ffmpeg code so that after transcoding it keeps the original file. Ideal skills and experience: - Expertise in FFmpeg customization and configuration - Familiarity with Linux operating systems - Strong understanding of video encoding and decoding technologies

I am in need of a Flussonic expert for configuration and customization. Specifically, I require assistance with integrating Flussonic with other streaming platforms. My preferred timeline for completing this project is within a week. Ideal skills and experience: - Extensive knowledge and experienc...skills and experience: - Extensive knowledge and experience with Flussonic - Strong understanding of streaming platforms and integration - Ability to customize and configure Flussonic to meet specific requirements - Efficient problem-solving skills - Ability to work within a tight timeline Basically i need to: - add 40 streaming url (4 video / 36 audio) - use the nvidia quadro a4000 gpu to transcode - create audio/video on demand for external app - configure the software for all o...

I'm bulding a streaming music platform and I'm trying to setting up the server on AWS. I'm using S3 Bucket to store the chunks (I'm using HLS), Elastic transcode to transcode file and CloudFront to delivery content. I'm struggling on getting signed url for each .ts file

Introduction In this project, the task is to use PHP to transcode videos of various heights using Google Transcoder service and save the output in a Google Storage bucket. The project mainly focuses on achieving transcoding for the HLS protocol. The transcoded video chunks should be saved in the Google Storage bucket. Additionally, the PHP code should query a database table for non-transcoded videos from the last 24 hours and initiate transcoding only for those videos. At the completion of transcoding, all output should be copied to the Google Storage bucket, and an API provided by the client should be called for completion. Finally, a PHP script should be developed to automate the entire job and run as a cron job at regular intervals. Video Transcoding using Google Transcoder Ser...

Por favor, regístrate o inicia sesión para ver los detalles.

...longplay service (from torrent, Internet Archive, etc), please!!! My new service will be called Longplay Network, and my new YouTube channel will be called LongplayNetwork. Based on AI, it will record longplays from games (PC, PS2, PS3, SWITCH, XBOX, XBOX360, etc, from RetroBat), from Torrent, Internet Archive, etc, it will upload the raw video to the YouTube channel LongplayNetwork and it will transcode the video to HLS and DASH, to play the video using the URL: [GAME_ID]/[LONGPLAY_ID]/ (HLS) or [GAME_ID]/[LONGPLAY_ID]/ (DASH), following the formats: LQ, AAC, 64kbps MQ, AAC, 128kbps HQ, AAC, 320kbps 144p, H264, 100-250kbps 144p, AV1, 80-200kbps 144p, VP9, 130-370kbps 240p, H264, 320-750kbps 240p, AV1, 290-690kbps

I need to get a Streaming Server setup so that we can create RTMP codes that use our URL, which we can use in encoders to send in live video streams to, and then the server will send them out to another RTMP we have setup as a target for that incoming RTMP. We don't need it to transcode or anything, just pass through the stream to another RTMP that we have provided. The goal is just to be using an RTMP that uses our URL, and then we can send it on to any other RTMP server we need. I'd like it to be done using Wowza so we can just pay based on usage (passthrough only) but not 100% set on that if there is something easier / cost-friendly. So our goal is to be able to generate an RTMP URL ("Branded-RTMP"). We then will use this "Branded RTMP" in en...

Instalasi IPTV server using iptv panel pro. input dvb/T2 Card, transcode to lower quality.

Me and family members want to watch our cable TV when not at home, using mobile 4G internet connection. For this i have a HomerunHD tuner, a 10th gen core i7 Intel NUC with iGPU, currently installed Ubuntu 20.04LTS and TVHeadend 4.3.0 (build 202012292042) Although this setup works fine with pass profiles, it eats too much data on my 4G connection. The iGPU should be able to transcode into HEVC greatly reducing the bitrate without loosing too much image quality. My Linux and TVHeadend knowledge is insufficient to get this working. I would like to hire an expert for remote installing a new TVHeadend setup (+OS when needed) that will using the HW accelerated iGPU ( QSV ) for HEVC transcoding while maintaining the source resolution and framerate. Using the iGPU/QSV is mandatory as my ...

Develop Website and App(IOS and Android) using below things ? Video Sharing Platform Like Youtube (With Live Streaming) Article Embbed From User Site Like Facebook Instant Article Create Reel And Upload Like Tiktok Random Video Chat Like Omegle Creator Studio Like Youtube Studio Pramote and Monetization Content system Like Facebook use for transcode video solution

Hi, I am looking for someone to create a system to restream Live Mpeg-Dash manifests parsing the segments to decrypt/copy and mux to HLS m3u8 manifest. This ideally i would like this done via ffmpeg/PHP/NGINX core setup. Process ideally.. open MPD manifest Create parser to download segments via Aria2c download correctly in correct order and concat to mp4 and then transcode to HLS via M3U8 with TS segments. Delete old concat files and downloaded segments.

I am looking to build a website with a Monthly subscription, to which a Physical item will be shipped to the Member. As Part of this I require an Online Shop where the user would select the subscription they choose. Initially 4 Options (but will grow) Each Member of the website will select the date they wish the item to be shipped. I would like to transcode the date into a week, so I will be able to ship a weeks worth of items on each Monday (or day I select. ) This is to be an automatic report that is emailed to me each week with details in the email and also as an attached CSV. (eg Name, Address, Day selected, Items, ect. Account Status) With reports sent to me everytime a new person signs up for the subscription, changes subscription or deletes their subscription. I will...

Software/cloud base streaming app. which will transcode inputs, and sends out an HLS UDP and RTMP stream. Run's on unix / linux

...prevent problems, and understands some of the best growth happens by working collaboratively with others. Required Experience: - At least 3 years of professional editing experience using Adobe Premiere Pro & Media Encoder. *Experience using After Effects, Davinci Resolve, Illustrator, Photoshop, Windows, WhatsApp, and G-Suite is a big plus. Required Skills: - Can ingest, organize, metalog, & transcode footage - Can implement basic color correction, audio effects, graphics, stock music, & stock footage. - Can work collaboratively within a remote and in-person team environment - Can edit to a beat, use keyframes, normalize audio to meters, & utilize color correction scopes Please provide samples of your work to be considered. Potential for long-term work dep...

...nfig:/config environment: - TZ=America/Bogota ports: - 8181:8181 #Plex Container plex: container_name: plexxy image: plexinc/pms-docker restart: unless-stopped environment: - TZ=America/Bogota - PLEX_CLAIM=claim-zD1MxUxfiLkdzqjohooz network_mode: host volumes: - /home/admin/plexxy/config:/config - /home/admin/plexxy/transcode:/transcode - /home/admin/plexxy/data:/data depends_on: - rclone-mount ports: - 32400:32400 rclone-mount: image: rclone/rclone restart: unless-stopped ports: - 80:80 cap_add: - SYS_ADMIN security_opt: - apparmor:unconfined volumes: - /var/run/:/tmp/:ro - /home/admin/rclone/config:/config - /ho

I have some Panasonic Arbitrator AV3 files and need a bash/sh/python commandline script using ffmpeg (or similar library) script to transcode to mp4 formats. I want to be able to execute such script ony any av3 file on Ubuntu Linux and generate transcoded mp4 files. I can provide a google drive link to files and samples containing the AV3 files. These video files are bigger than 25 mb. Audio works find, but video is a mess. VLC player currently renders this; see attached.

...up to 3GB storage Can not sell content Can follow users, subscribe to channels and watch and purchase content Pro Users Can upload up to 4k resolution, no length restrictions, up to 10GB storage Can use the Go Live feature to Go Live to followers Can sell content - set price, PPV/Buy/Rent or monthly subscribe to channel to access all content Can purchase additional Storage HLS, Dash Upload, Transcode, Encode and Deliver via CDN ... AND ... FFMPEG with remote storage to DigitalOceanSpaces (Either one can be turned on or off in admin panel) Admin Commission Hire a creator (Post Jobs, Apply for Jobs, Available to Hire Status) - Pro Users Only Full User Dashboard Analytics Pro Users can use Google Analytics as well Generate PDF Invoices and Receipts with NZ GST Tax Rate (15%)

...up to 3GB storage Can not sell content Can follow users, subscribe to channels and watch and purchase content Pro Users Can upload up to 4k resolution, no length restrictions, up to 10GB storage Can use the Go Live feature to Go Live to followers Can sell content - set price, PPV/Buy/Rent or monthly subscribe to channel to access all content Can purchase additional Storage HLS, Dash Upload, Transcode, Encode and Deliver via CDN ... AND ... FFMPEG with remote storage to DigitalOceanSpaces (Either one can be turned on or off in admin panel) Admin Commission Hire a creator (Post Jobs, Apply for Jobs, Available to Hire Status) - Pro Users Only Full User Dashboard Analytics Pro Users can use Google Analytics as well Generate PDF Invoices and Receipts with NZ GST Tax Rate (15%)

I need a python expert with AWS Lambda experience in order for us to work on a mini project to transcode files in an S3 bucket. I will be assisting.

i have capture card it needs stream out http streams when inputs are inside it has to copy exact stream input to http stream outpu...stream out http streams when inputs are inside it has to copy exact stream input to http stream output it has 4 hdmi outputs i need able to give channel names like channel1 channel2 channel3 channel4 so every input which is connected should have its own link like :port/stream1 :port/stream2 :port/stream3 :port/stream4 it shouldnt transcode anything just use the encoders from the card to get right quality and fps details about the card: it has 4 encoders inside it has also own sdk api Pro Capture Quad HDMI Four-channel HD capture card Part number: 11100 SKU: 111000000 HDMI x 4 + embedded audio x 4

I have system with ubuntu 18 magewel pci pro quad hdmi capture card installed nginx and rtmp for nginx streaming. problem: i cant get the right pipe line for streaming i dont need to transcode it it should raw stream the video it should give me the same output as it capture. this card has four dedicated hdmi ports each can do 1080p60fps

Hello freelancers! I want to hire a developer to transcode my Android App (please check 3DScoreBuddy in Play Store) into Flutter language. The purpose is to have it compatible with Android and iOS with just one code base to maintain. As you can see in the play store description, the app is an scoring app for 3D archery. The app offers offline scoring and cloud based scoring (you can test the cloud-connect feature with 101/1234). Also theres a lot of swiping feature to switch the stored events on the main screen or to switch the target at the scoring event plus swiping the archers results in a detail overview of the targets scoring result. The data is actually stored in private preferences as JSON. This is not fixed, you can change it to a better data storage solution you prefer (e...

... I transtode 1080 to 720p which in current setup should easily handle 30/streams. The GPU transcoding works fine on 3 streams if I add 4th or more streams to be transcoded with GPU it will not input the stream (delay and fail) causing Error. Stream will go offline. It will not effect other streams but any stream above 3rd GPU transcoded. If I disable transcode it will process the stream. Also if I switch GPU to CPU transcode it will transcode 1080 to 720 even if its 4th, 5th or 6th stream until I reach 100% CPU usage. When I use 3 streams on GPU the load on GPU is not even 5% so it's not overloading. Looks like GPU can only handle 3 transcoding streams but its not overloading GPU is just rejecting where much less powerfull CPU have no limit as much as it can ha...

Hi there! We're looking for people who are able to transcribe, translate, and transcode for a documentary we are working on. Individuals applying should ideally have experience working with documentary scripts. Please do apply with your rates and your availability and we will be in contact shortly.

Download a file in PDF from php mysql database I have designed an html template that you will need to transcode This is the file below that I want to be downloaded in PDF

We have a gpu-based 3D reconstruction script in Matlab (< than 80 lines), basically including a lot of deconvolution operations. We can offer this script with comments. We hope to transcode it into a CUDA version with full comments for higher acceleration on GPU devices.

Hello I currently have a Wowza server on Centos. They are increasing their monthly price and I am looking for to replace them, hopefully with something free. I would like your recommendation and install the program and help setup one stream. 1. I do not need to transcode my streams 2. I want to prevent other sites from stealing my streams, and only requests made by my site or specific IP addresses will be accepted. Someone actually developed an app to show my streams, and wowza is not blocking it. 3. I would like to show on my wordpress site, the status of streams, which are offline and which are online. 4. Must stream to all platforms, PC, Android, Apple. Thanks Adrian

FFmpeg script for video transcoding cpu based. it should have the following features: - restart channel if getting 0.998 speeds - check audio , no audio restart channel - if stream down try restart stream (1minute) - deinterlace (ywbdif) / AAC codec - its for 20 channels i need transcode to lower bitrate h264 (from 8/9mbit to 3mbit) - show uptime channels / stream details - show realtime bitrate, audio codec, video codec , uptime (xxx hours xx minutes xx seconds) i have my own rtmp server, so only need the script for ffmpeg been written so its fully automatic.

What you will do: Build new features for client and internal-facing web applications Utilize queues and workers to transcode and deliver audio and video at scale Work with a cross-functional team of developers, product, and QA Ensure high quality through code reviews, automated testing, and monitoring Deploy new features behind features flags in a CI/CD process Contribute to retrospectives and process improvements What you need to have: Minimum 5 years of development experience with PHP and MVC frameworks Good verbal and written communication skills Expertise with SQL, schema design, and data migrations Moderate experience with Javascript and CSS Experience researching and using third party APIs Comfort working with a partially distributed team

...running Azure App Service (not as a VM). *Work with DevOps to set up environmental variables necessary for managing continuous deployment and pipelines. *Work with DevOps to set up and test the deployment system. *Document systems for onboarding of future developers Update strapi to newer releases Extend strapi with new content types as may be required by the business Possibly: develop system to transcode .JPEGs to .WEBP either as a part of strapi or in CDN/Storage layer. Required Skills · Version control: git · Familiarity with Strapi headless CMS · Experience deploying Docker containers to Azure App Service · Experience with Azure DevOps Project technology stack Azure File Storage Azure MySQL as a service Azure Web...

...player could be made (from existing open source parts) that can be dropped into a folder where it automatically indexes all video files in the folder (normally 20-30 or so at the most - indexing sub folders not necessary) and presents them as a list from which they can be played. Ideally I would like to be able to place large video files (high bit rate - ready for publishing) but have the player transcode it on the fly so people don't need to download a huge amount of data while playing the file. I know the Synology NAS can do transcoding, but not whether or not it can be done from an http server on it. So to be clear, I'm envisioning the end result being a simple "" file, I'm guessing with an accompanying sub folder. These two things (one file and one f...

We are a digital fitness studio built on WordPress and hosted by Siteground. Our fitness videos are currently hosted on AWS S3 with a URL link to our web platform in a video gallery format. However, we are starting to produce higher quality videos that are bigger in file size and would like to transcode each video for more automated screen resolution adjustment based on the viewer's internet connectivity, and further create a video layout that is similar to a Netflix or a Disney+ carousel. We also live stream fitness classes (25-30 per week) using Zoom with an RTMP push to a service called BoxCast. BoxCast streams the video to our website and also records each live class on their own AWS server. If possible I would like to re-create this service using our own AWS bucket - and...

I use ffmpeg to transcode videos on the Mac and am looking for a Droplet or other little app that can automate this process. I'd like to drag a single video file, or multiple video files onto the icon and have it batch process them. It could be a simple app with no UI and output an h.264 at an 18 setting in MP4 format; or it could give me a window with a few options (sometimes I want an uncompressed output, for instance). Retaining every frame and not duplication any frames is key in my work. For instance if the original is 15 FPS, I need the output to be 15 FPS. If the original had 3,000 frames, the output needs to have 3,000 frames. I can do this pretty easily in Windows by creating a .bat file, but it seems to elude me on the Mac.

Receive a live video stream in windows platform from a mobile device via SRT protocol (originating from apps like Larix broadcaster or Haivision Play Pro) as a source and than transcode the incoming video to a specific video format(For example 1080i50) with a specific codec(Mpeg2,H264,Hevc), and broadcast it as a UDP/RTP multicast/unicast DVB standart Mpeg-TS stream via at least 2 NIC port. If possible, a gstreamer solution with Rust language is preferrred.

Expert for - Nimble Media Server - WMSpanel installation on linux OS, set capture, transcode, record archives, live and on-demand - Fix price for installation (we will supply the VPS) Training our Video team, Operational / support on a Hour basis

LOOKING FOR A EXPERT. we are a WebTV with 50+ streamers, we are looking to transcode all with gpu and output to twitch. The tricky part is we want fallback video to run. So all stream data: size, video rate, pixel form etc needs to be the same for it not to crash the stream. We are looking for someone expert in stream, Ubuntu, nginx.

This project comes in a need to give options at the codec level, from H254 to H265, HEVC, others, in live stream. To support the encode / decode it will be based on FFMPEG and Nvidia GPUs, or similar. The Panel must work on linux environment. License system must be incorporated for software protection. More details will be provided after contact...

A little explanation, we are a twitch channel running 24/7 non stop, we work with 50+ streamers that relay all the time to keep chanel running, we took new server to do the following: We want to make a nginx rtmp server with specific functions. Full incoming stream transcoding (GPU to not use all CPU power) Fallback video (so live never go offline) same transcode as incoming stream for no error We already have authentication but on other server, move everything to new server Add crash check on authentication so when connection drop the connection does not stay live Planned video stream, stream a video on the live at a specific time. We will need logging, and a maximum of information. (incoming stream, outgoing stream, transcoding, cpu, gpu usage, etc saved to database.

Hi video editors, I have a video showcasing a product you can view in this link: Since the product layout has changed would like to update the video. I have already taken a screencapture with loom of the video but would like to do some editing on it. What needs to be done is some speed control and some zooming in to highlight specific areas. Actual screen capture is 2min long for the final product 1-1,5 min. The video is going on a Website so it needs to be lightweight. Cheers

I'm Tresor Kane, based in France, My parter and I I'll be starting business in live events streaming and VOD providing soon. We have streaming servers, the first on ...Example, if the content which is being streamed is of People runing, the DAI Server can shoose the related to that activity. Please not that this feature above can be bypassed, it is not that much crucial. Adaptive bitrate (ABR) should also be considered. Eg. DAI server should analyse the ad's video and make sure that is in accordance with feeds which being streamed as our server will have to transcode to different bitrate for live and VOD. This feature is very crucial amaong all other tipical DAI features. Looking forward to hearing from you soon. Ps: below are some topo collected from Google. ...

...do things they claim to already know. If you mess up my site I will not be happy, care must be taken. We have a social networking site that allows users to upload videos, currently, the videos uploaded by the standard are uploaded in full, and as a result performance for playback is inconsistent and load on servers is affected. We need a VOD pipeline setup on AWS that will take videos and transcode them to hls, mp4. We would need to setup encoding profiles and support for different dimensions and allowing us to limit bitrate so that the output video is equal to or less quality of the uploaded video. The api for the video upload feature are already there, you just need to link the upload function to the aws pipeline and end, once it is setup. We already have a older pipeline ...

I need a c# with ffmpeg wrapper that can receive N RTSP stream from cameras in H264 and H265 codec. Save it in Raw files splitted in 5 minutes files from each camera and restream in multicast N*3 (low quality,medium quality,hight quality) TO N clients vrtsp viewer and trascoding from h264 to h265 in case of original camera codec is h264. Only server should be done,

I need a c# with ffmpeg wrapper that can receive N RTSP stream from cameras in H264 and H265 codec. Save it in Raw files splitted in 5 minutes files from each camera and restream in multicast N*3 (low quality,medium quality,hight quality) TO N clients vrtsp viewer and trascoding from h264 to h265 in case of original camera codec is h264. Only server should be done,

I need a c# with ffmpeg wrapper that can receive N RTSP stream from cameras in H264 and H265 codec. Save it in Raw files splitted in 5 minutes files from each camera and restream in multicast N*3 (low quality,medium quality,hight quality) TO N clients vrtsp viewer and trascoding from h264 to h265 in case of original camera codec is h264. Only server should be done,