Stopwatch apptrabajos

...button that will help me track time for multiple projects/clients per day in .1 hour increments. The interface should include a user inputted client list (alpha, recents, searchable). (1) User clicks "Start Day" button that activates clock for that calendar day (2) User selects Client? X? from a list (or inputs if new client) (3) User? clicks stopwatch to begin time for Client X? (4) interface shows time accruing (5) User clicks stopwatch to end? (5) stopwatch for this client/matter can be stopped and started multiple times per day and keeps a running tally of time for that day for that client. (6) User can select Client Y and do the same thing, BUT, if user has not stopped timer running for Client X, then Client Y time will not start and message to user s...

...project description before responding. I've uploaded an example of what the final product should look like when complete. It was created using Flash 8. After viewing the example you'll see that it is a short and fairly simple operation. demo begins. animated stopwatch appears. later, a message asking the user to match a specific time appears. It purposely appears roughly 3 seconds before the stopwatch reaches the time it contains. the user is able to stop the stopwatch at that specific time a, "You've Won" message appears. What I need is to have this short game re-coded to prevent a user from cheating. I'd actually prefer that Flash/Actionscript not be used to create the final product. I want as much as possible...

...device over Bluetooth and send one AT command (see the following for a description of AT: ); - read button presses and read input from the joystick thing - read the time to millisecond accuracy. The application should use the above functions to check the time when I press a key, read the time when I press a second key (like a very basic stopwatch) and then send the time difference as text to a second device over Bluetooth using AT commands. The phone should vibrate when I move the joystick thing. The way it vibrates should be different if I move the joystick in the x direction than if I move it in the y direction. I don't need any graphical output and I don't need any software for the second device. The purpose of theis "application" is

I need a coder to update a current Palm based software program that now has an error when used on the new Palm Centro (Palm OS® by ACCESS 5.4.9) The software works correctly but shuts down the device when the user attempts to export data to the Memo application.

I need a coder to update a current Palm based software program that now has an error when used on the new Palm Centro (Palm OS® by ACCESS 5.4.9) The software works correctly but shuts down the device when the user attempts to export data to the Memo application.

Develop a relatively simple iPhone SDK/native application which employs a stopwatch timing multiple users, storing that data in a local SQLite DB and then sending/syncing that data to a website via an API provided by the site. ## Deliverables Features may include: Time Functionality similar to the built in stop watch Tab Bar Controller Basic Location Awareness Date/Time Awareness User Adding/Edit/Deleting Adding users to a conference Syncing data with web site's API SQLite Preferences Screen Possible features: Ability to take photo and send to website Ability to record audio and send to a website

I need an app that will log time that I spend on Photoshop projects. I run a wide format printer and we also provide retouching services. At the present I need to manually activate a stopwatch on the desktop, then log the time. What I specifically need is an app that will nag when I open a file from within Photoshop. It would ask me: 1. Do I need it to monitor the is my opt out. If I am doing unbilled work, it disappears. It would be nice to be able to disable it for that session or a length of time at this point and be able to reactivate it from an icon somewhere. 2. If I ask it to log the file, I would be asked to enter a name or invoice I close the file it would record the time the file was open and the name to a central text file. It would make a new file ...

Por favor, regístrate o inicia sesión para ver los detalles.

This project is an application for the Apple iPhone, using the recently released SDK. It is an advanced stopwatch/chronograph to be used by coaches and spectators to time athletes in various events (e.g. track, swimming). It can time several athletes at one time and saves race data locally, on the phone. Events to be timed are either created through the application or are downloaded from a web page. Results are uploaded to a web page as well. I have created all the graphics and a Flash demo which shows all of the expected functionality: **<>** Before bidding, please take some time to familiarize yourself with the Flash demo. It is EXACTLY what I expect to see in the final product. I have spent a lot of time on this demo, so hopefully there will

My site is getting too big for the basic layout I made for it. Time for an upgrade. The site deals with the sport track & field (running). I guess it would be nice to incorporate a track or stopwatch or something relative. Not necessary though. The current site is black and white and I think some colors would be nice. The layout HAS to be simple enough for anyone to use. I can not stress that enough. But I need room to grow. I add new features almost every week. The HTML should be formatted into a header and a footer because that is how the site is programmed. I currently use CSS and would need all that updated. ## Deliverables I would like to avoid flash and I want the site very search engine friendly. I prefer text navigation links. As I said, I add features very often so I...

Very small quick project, but I need the help now. I have built a flash page at this location - all I need is a stop watch in the upper right hand corner. I don't want anything else affected - I just want a simple digital stop watch. I have read through about a dozen tutorials online and still can't get it to work. Maximum time it would be expected to run is 2 hours. The objective is for the user to be able to click one button that says Start and then do the work they are supposed to do and then when finished - click on a Stop button. It would be nice to have a Reset button so they could start on the next assignment. As for the digital clock - anything with readable numbers is great - if you have a nice styled digital clock that would be nice. Pretty much the first ...

We have a count-up flash stopwatch which we use for a web application. In the coding of the stopwatch there is something which updates a field/value on the webpage every second (i believe the calling of a javascript function) The problem is that this updating causes the browser to play a sound as if it's reloading a page. This happens because we need the flash object to return a value to the webpage. Many of our users' browsers are set to make a 'tick' sound when a page gets reloaded (i believe this is default in IE7) which right now happens every second. We need the object modified in one of two ways: 1. change the flash control to only send this command to the browser field once every minute (at the start of the minute), not once ever...

We have a webpage that we need to implement a count-up stopwatch into a web-based application. you should make it look very similar to <> - but it has to be 198x38 pixels and should fit nicely on our webpage. it must submit time values to fields on the must be able to show us samples of the work in progress on your web site (so we don't have to "install it" to test. it must look nice and should be written in flash. full description is in the attached file. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a)

We have a webpage that we need to implement a count-up stopwatch into a web-based application. It must be a web user control (.net ASCX file) full description is in the attached file. you must be able to show us samples of the work in progress on your web site (so we don't have to "install it" to test. it must look nice. we encourage the use of ajax or other new "web 2.0" technology. It can also be written in Flash. i would want some picture of a stopwatch with the "hands" animated. something like this: ## Deliverables 1) Complete and fully-functional working program(s)

...button, the slices stops, and the game calculates how precise the player was. The third game is not really a game, but more an “offline” test, that comes with different exercises. Each exercise will show a couple of static pictures or a simple animation, that illustrates what the user is to do. The player will then see a stop-watch, which the player can activate. When the player has activated the stopwatch, it will begin to count fractions, seconds and minutes, and when the player activates it again, it stops, and shows the time spend. The score is then calculated by comparing the time spend, with the optimal time for the type of exercise. The game must support a 2 player mode that employs the network protocol implemented by our game framework hence making network...

We have a webpage that we need to implement a count-up stopwatch into a web-based application. It must be a web user control (.net ASCX file) full description is in the attached file. you must be able to show us samples of the work in progress on your web site (so we don't have to "install it" to test. it must look nice. we encourage the use of ajax or other new "web 2.0" technology. It can also be written in Flash. i would want some picture of a stopwatch with the "hands" animated. something like this: ## Deliverables 1) Complete and fully-functional working program(s)

1.1 This page's HTML markup is a form containing only 4 elements 1.2 Two inline textfields at the top of this page positioned at extreme left and extreme right 1.3 The left textfield is NAME, the right is TIMER 1.4 The NAME field gets its input from a Mysql database 1.5 The TIMER field displays as HH:MM:SS 1.6 As soon as NAME is populated, TIMER starts and updates every second 2.1 Two inline buttons are at the bottom of the page 2.2 They are located towards the middle, not as far apart as the above 2 elements 2.3 They are named PAUSE and NEXT 2.4 NEXT updates the Mysql DURATION column of this NAME from TIMER 2.5 Then resets TIMER to 00:00:00 2.6 Th...

The basics of the application: - A stopwatch program used by coaches to time athletes (track, swimming, etc.) - Runs on a cell phone - Saves small amounts of data locally - Downloads event data from a website - Uploads event results to a website Details - The application has a home screen with four menu options (EVENTS, RESULTS, CLASSIC MODE, and SYNC) - EVENTS is a list of events saved on the device - These events can be downloaded from a website or entered manually - When an event is selected, the user can time the event using the phone keypad - Relay races display the total time and the current leg time - RESULTS is a list of events saved on the device - CLASSIC MODE is just your basic stopwatch - SYNC is where you upload event results and download event details - The uplo...

Currently have a J2ME MIDP 2.0 application that is a stopwatch. It records times, splits and laps and works out velocity/speed and lengths of strokes (swimming). I need this is have an additional feature where it can be syncronised to MySQL that can then be used to search. In addition, the following need changing: - The logo on the application needs small alteration - Extra detail of event recorded (location + date - chosen from calendar) + change of text on label - Sync. with MySQL over WAP for viewing on normal internet. - Addition function of converting times to points (formula will be given + conversion table supplied) ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. ...

This app must be done using Flash Lite 1.1. It is available under Flash 8 Professional or Flash CS3 Pro. Flash Lite 1.1 is mainly designed to work on mobile devices and you can basicaly do the same things like in normal Flash but with some restrictions. You can see the Flash Pro Help for more info and what you can do or not in Lfash Lite in order to implement this app. This flash app must do: - on startup shows a splash then a menu list - the menu entries: Count-up, Count-down, Reminder **For full description please, see the attached file. ** Please feedback if you have further question; This application shouldnt put any problem for an experienced Flash coder, more less if he already worked with Flash-Lite. On final, I require all files of the pro...

The basics of the application: - A stopwatch program used by coaches to time athletes (track, swimming, etc.) - Runs on a cell phone - Saves small amounts of data locally - Downloads event data from a website - Uploads event results to a website Details - The application has a home screen with four menu options (EVENTS, RESULTS, CLASSIC MODE, and SYNC) - EVENTS is a list of events saved on the device - These events can be downloaded from a website or entered manually - When an event is selected, the user can time the event using the phone keypad - Relay races display the total time and the current leg time - RESULTS is a list of events saved on the device - CLASSIC MODE is just your basic stopwatch - SYNC is where you upload event results and download event details - The uplo...

...reports by day week month year for thatchilds time usage. Please see the two mock ups to get an idea of how I am thinking it would work. When the child comes home from school, he will click the "Home" button, that will start the stopwatch going for that day. From that point, he cannot stop the stopwatch until he clicks "Go To Bed". Clicking go to bed stops the stopwatch. After he has clicked the home button the stopwatch starts adding time to the home category for that day, when he is ready to start a task he simply clicks that button and the stopwatch starts recording the time for that particular task, and the button for that task becomes unavailable. Clicking any other task button starts that task being counted, and auto...

...MPLAB, don't bid I know very good what i need and it is something very simple. A very close application can be found here : I have 10 years of programming but i need someone that will show me the basics of how this thing gets done, because i can't find my way in MPLAB. So... We need a stopwatch that will be extended with one more math operation (we will multiply the time with a distance). We will have a pin that will be a start button and another pin that will control the stop button. We need to know the time that passed between the pressing of the 2 buttons. Based on the time, we will multiply this with a distance and we will get a speed. This speed should be displayed on an LCD display

I need a php script that will interact with a mysql database. The purpose of the script is to keep track of how many hours are spent by my children on different things, this should help them get better time management skills. The basic idea is one of my children can log in when they get back from school and click a button that says they are home. After that as they do their homework, chores etc, they click on the appropriate button. These different buttons need to be able to be added by me in a simple admin panel. As they week progresses, the child can see their totals. I have a screen mockup I will send to the winning coder. I look forward to your bid.

...main processes, a sitemap and the PSD files for the design templates. We need the following adaptions (compared to a "normal" real estate market place): - closed community (login/password for all users) - exclusive reservation of real estate offers (afterwards blocked for all other users) - simple validity check for certain investment criteria of the homes - statistical/administrative area - stopwatch for the remaining time the project will be advertized on our platform - CMS system for easy administration and translation in other languages - user area with views for visited objects, current account status, ... - news area ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) De...

I am looking for a simplistic assembly written stopwatch which counts up to 99 in steps of 9. each step must take 1.63 seconds to complete and the number output on one of the ports of the chip in binary. the stopwatch should also have the ability to be paused at any time and reset to 00 after 99 automatically if not paused. I have a very limited but specific instruction set that i can use. the instrustion set can be found at: ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only

Por favor, regístrate o inicia sesión para ver los detalles.

Ok, I need a custom timer which has the funcionality of a countdown stopwatch made out of a something like a Staples "easy button". It will be a red timer that is circular and activitaed only by pushing the top of the timer. In addition to buzzing at the end of the countdown cycle, the device should also include an LED light embeded that flashes at an ever increasing rate as the countdown aproaches zero. As far as the timing aspect goes it will have two functions: a 30 second countdown function and a 15 second count down fucntion each with a beeping cycle and a flashing cycle. TIMER - The timer functions as follows: TO START THE 30 SECOND CYCLE: Push the large red button on top of the timer one time. TO START THE 15 SECOND CYCLE: Push the large red...

Ok, I need a custom timer which has the funcionality of a stopwatch made out of a something like a Staples "easy button". It will be a red timer that is circular and activitaed only by pushing the top of the timer. Basically, it will have an LSD screen in the middle or somewhere on the top which can easily be seen and a red button which will consist of the entire top with the screen enclosed in it. As far as the timing aspect goes it will have two functions: a 3 minute countdown function and a 30 second count down fucntion and beeping cycle. TIMER - The timer functions as follows: TO START: 1) Push the large red button on top of the timer one time. This will start a three minute timing cycle. 2) The timer will beep every thirty seconds and then a warning beep wi...

I'd like a graphic tweaked on this page: (iStockPhoto) You can see a sign with three cogs on it ... I'd like it amended so the central cog is an analog stopwatch graphic with cog teeth around its edge, so it looks like the other cogs are "powering" the stopwatch ... The stopwatch graphic should match the looks of the cogs, grey with a couple of hands in it ...

I need a stopwatch/timer script for a custom Outlook Contact form. Function will be similar to that on the Journal/Activity form. I think it would be best for you to build a custom form with these elements and give me the project by Outlook pst file. Features needed: - start/stop togglebutton input with ability to pause timer - reset button input - start & stop time variables - start variable defaults to date/time of form open - actualtime (duration) variable that displays in hour:minute format (01:30) - I need a field for actualtime with the ability to hand enter decimal values (ie: 1.5 instead of 01:30) that will automatically convert to hour:minute. When a value is hand entered the stop time variable should reflect the time of starttime + actualtime - A field for...

...polling involved, only WaitForSingleObject or similar techniques using Windows API. The interface should look like this: type TEventType = ( feFileSize, feLastUpdate ); TChangeEvent = procedure( Sender: TObject; const AFilename: string; const AEventType: TEventType ) of object; TDirWatch = class( TObject ) public procedure StartWatch( const ADirectory: string ); procedure StopWatch; property OnChange: TChangeEvent; end; ## Deliverables 1) Complete and fully-functional component in source code. 2) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramificatio...

---------------------------- Flash Timer --------------------------- Purpose: A Super Simple Count Down Timer in Flash - Work with player in Flash 6 and up. (even Flash 5 if you can) - the smaller the .swf the better. ---------- Reference: See the sample .fla file at: (this is a stop watch, not a count down) ---------- .swf, .fla required, all source commented and well written. Must work on Mac and PC Add the following to change the Stop Watch to Countdown timer 1- Make it a count down timer (NOT a stop watch) keep the reset button as is. 2- ADD a nice, clean, simple progress bar below digits 3- How to set the starting value Type into the LCD Display 60 for 60 minutes or 120 for two hours or 2:00

Creating an Access 2000 db and trying to learn how to add stopwatch times for motel housekeeping staff and do calculations with that data. I have a db that can be worked in, but would prefer a simple db with employee name, room # they cleaned, on what date, room type (K, Q, QQ) and how long it took to complete (minutes.) Need a simple form to enter the data, and a report to calucate average time by employee, by employee and roomtype, and by roomtype for all employees. The purpose of this database would be to teach me how the time functions work (I've tried to teach myself and am frustrated... the only online info I can find refers to date/time, not result times) and then I will use this example database to take off and implement it into my own projects that require...

Convert or re-write a previously developed Palm OS stopwatch application to run similarly on Pocket PC. Program must support all Pocket PC machines (HP Ipaq, Dell Axim, etc.) * See software "Multi Runner Split Timer" on attached Palm emulator ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) A software installation package that will install the software in ready-to-run condition on the platform(s) specified in this bid request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and co...

I am learning Delphi (7) and need someone to convert a very simple stopwatch program I made in VB to Delphi (Make the same stopwatch with the same simple functions using Delphi) the Stop watch is a very simple program, I am required to learn this so every important line of code that can be, needs to be commented so I can learn. The simplest code/solution should be used, I found my solution for the VB Stopwatch to be the best and this project should be made similarly. I need this project done in about 1 to 2 hours and need a direct consultation/tutorial of the code/project afterwards. Since it is such a small project I will only be offering $5.00 for the completed work, but will keep the coder in mind for future projects (see my previous history on RAC, I bid out alot o...

...integers (int). To handle the replacement selection algorithm, we suggest you create a class PQ (priority queue) so that different size priority queues are available for use to preprocess the input. You are to implement A) Balanced N-way merge algorithm discussed in lecture, and the B) Replacement selection algorithm that preprocess the initial data to form longer runs. Data files and stopwatch and started code already included. Zip file has complete details. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): 3) All source files of program, 4) all Java .class f...

I am interested in having a stopwatch that has the following functions: 1. Ability to take times for 4 runners at a time, and to take splits for each of them (up to 25 split times) 2. The watches must start together via a common start button, yet have the ability to take separate splits and be stopped separately. 3. The data must then be able to be read simply and stored, printed. MORE NFO CAN BE SENT INCLUDING AN IDEA OF SCREEN DESIGN IF YOU E-MAIL ME. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) ...

...specifications for this project are as follows: 1. Create rotating or animated disco ball as logo's background. See: 2. Use the Draft Party company name's acronym or abbreviation "dp" as the logo's centerpiece. 3. Butt the two letters together and enlarge them to a suitable size. 4. Transform the "d" into a stopwatch (preferable a working one). 5. Transform the "p" into a coach's whistle. 6. Place the letters "raft" at the top of the "d" to form the word "draft". 7. Place the letters "arty" at the hump of the "p" to make the word "party". 8. Add slogan: "The People Make It Interesting!" 9. Set up demo, and rework if necessary. 10. Apply it to webs...

...FilesInternetMacros3Macros 'Run as "C:Program FilesInternetMacros3" -macro Davez-ResponseTest -tray 'View results at C:Program FilesInternetMacros3Downloads SET !CHECKING YES SET !FILESTOPWATCH STOPWATCH ID=total URL GOTO= STOPWATCH ID=total I will run this 10 times and throw out the highest and lowest scores and take the average of the eight scores that are left. (Right now the average is 196.1166667 which is about an three minutes and sixteen seconds.) Now, If you get an average of greater than

Masmedia Inc. is the sole owner of the copyright to this simple application. I need an accurate stopwatch that can be accessed on the web. The stopwatch will measure time but also frames at any framerate. For example if the user imputs the 24 F.P.S. (Frames Per Second) framerate and then starts and stops the stopwatch after 3 seconds, the readout will be the following: (3seconds) = (72 frames) at (24 frames per second) ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Complete ownership and distribution copyrights to all work purchased. ## Plat...

Motorsports Software Application Needing a developer to develop a relatively simple application, developer can choose development platform. Previous app's have been developed in VB. Program will entail several fields that user can enter data into and program calculates information for user. Program will also need a simple user controlled stopwatch. Graphics will be supplied to developer for app. General knowledge in automotive field a plus, developer in USA desired. Developer will need to create Icons for program as well. ## Deliverables 1) Complete and fully-functional working program(s) in executable form (with Icons) as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s...

Build a Palm OS stopwatch program useing the PDA's internal clock for timing that: - Runs upto 7 namable stopwatches at the same time capable of timing six individuals at once - Has at 99 lap records - Has two viewing mode: Standard and Zoom (large font for one watch) - Maps up to four hardware buttons to Start/Stop/Reset/Lap the stopwatches and maps an additional 3-4 graphical buttons for the same - Has a lap records listing screen for reviewing the records - Can export the lap records to memopad - Has option to prevent double taps of the same button/function within 1sec. (prevent mis-tapping a button) - Supports all Palm Computing Platform machines (Palm V, Palm IIIx, Palm III, PalmPilot, Pilot 1000/5000 and IBM WorkPad) See program Stop3Watch ~alf/ as an

...FilesInternetMacros3Macros 'Run as "C:Program FilesInternetMacros3" -macro Davez-ResponseTest -tray 'View results at C:Program FilesInternetMacros3Downloads SET !CHECKING YES SET !FILESTOPWATCH STOPWATCH ID=total URL GOTO= STOPWATCH ID=total I will run this 10 times and throw out the highest and lowest scores and take the average of the eight scores that are left. (Right now the average is 196.1166667 which is about an three minutes and sixteen seconds.) Now, If I can beat your score by modifying your deliverable

...File in the tray mode to perform the response time measurements. The macro looks like this: 'Saved as C:Program FilesInternetMacros3Macros 'Run as C:Program FilesInternetMacros3 -macro Davez-StressTest -tray SET !CHECKING YES SET !FILESTOPWATCH STOPWATCH ID=total URL GOTO=file:///C:/Documents%20and%20Settings/dbabbitt/Desktop/Payroll%20Data%20Exporter%20Step%204%20of%204%20Payroll%20Register/ STOPWATCH ID=total I will run this 10 times and throw out the highest and lowest scores and take the average of the eight scores that are left. (Right now the average is 6002.064 which is about an hour and forty minutes.) Now, If I can beat your score by modifying your deliverable, I will consider the job incomplete

...File in the tray mode to perform the response time measurements. The macro looks like this: 'Saved as C:Program FilesInternetMacros3Macros 'Run as C:Program FilesInternetMacros3 -macro Davez-StressTest -tray SET !CHECKING YES SET !FILESTOPWATCH STOPWATCH ID=total URL GOTO=file:///C:/Documents%20and%20Settings/dbabbitt/Desktop/Payroll%20Data%20Exporter%20Step%204%20of%204%20Payroll%20Register/ STOPWATCH ID=total I will run this 10 times and throw out the highest and lowest scores and take the average of the eight scores that are left. (Right now the average is 6002.064 which is about an hour and forty minutes.) Now, If I can beat your score by modifying your deliverable, I will consider the job incomplete

...form is submitted the time the form was open will be submitted to a database with an existing SQL string that pulls other information from the form. ("insert into Workorders (Date, Priority, Status, Task, ticketclock) values ('"& currentdate & "','"& ("Priority") & "','" & ("Status") & "','"&taskinsert("task")&"','" & ("ticketclock") &"')") The stopwatch information would be represented by the ticketclock field in the above statement. I will provide the current form for modification. I will test the form on our website and can provide access to the site for development purposes. The ticketclo...

Build a Palm OS stopwatch program useing the PDA's internal clock for timing that: - Runs upto 7 namable stopwatches at the same time capable of timing six individuals at once - Has at 99 lap records - Has two viewing mode: Standard and Zoom (large font for one watch) - Maps up to four hardware buttons to Start/Stop/Reset/Lap the stopwatches and maps an additional 3-4 graphical buttons for the same - Has a lap records listing screen for reviewing the records - Can export the lap records to memopad - Has option to prevent double taps of the same button/function within 1sec. (prevent mis-tapping a button) - Supports all Palm Computing Platform machines (Palm V, Palm IIIx, Palm III, PalmPilot, Pilot 1000/5000 and IBM WorkPad) See program Stop3Watch ~alf/ as an

This program will be designed to set up an alarm clock. The program you'll create is a multiform project that will require a main menu to appear first. From the main menu, the user will be able to access the three features of your program by clicking on the appropriate otion button (Alarm Clock, Timer, or Stopwatch) and clicking on the Go command button. The default for the user is to go to the Alarm Clock feature if the Enter key is pressed. This program must look exacly as specified, therefore, it's necessary for the programmer to provide a fax number so that I can send the details to him/her. ## Deliverables Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. Complete copyrights to all work purchased. ...

...requires the main menu to appear first (which mine does). From the main menu the user will be able to access the three features by clicking on the appropriate option button and clicking the "Go" command button (this part of the program also works). The options are Alarm Clock, Timer, or Stopwatch). The default for the user is to go to the Alarm Clock feature if the enter key is pressed. Each form has a drop down menu called "Navigation". This menu is the pathway that users will take to get to the Timer, Stopwatch, Alarm Clock or the Main Menu. For the Alarm Clock feature the framecontains two options and command button "Update Settings". This series of components allows the user to set the alarm by using a series of pop-up input boxes. The use...