VHDL/Quartus Expert from Pakistan

Design Problem specification:

To design and implement a robotic system, NIOS2 processors are considered vital as they

provide security and reliability. You are required to program and demonstrate a 16-bit NIOS2

processor for the given instruction set in VHDL. You are required to design and implement

each component such as arithmetic logic unit (ALU), memory system, control unit etc.

separately in VHDL and verify them on FPGA board. Moreover, you are required to integrate

all these components in VHDL and demonstrate the complete system design on the FPGA

board.

The documentation should show justification for any design decisions that you make as well

as development logs for both hardware and software. Evidence of approaches used for the codesign, co-implementation, co-testing, co-integration, and system integration must be

provided.

This assignment will provide experience of the problems and decisions in developing co-design

projects. There are many possible solutions to the design problems depending on the way in

which you choose to partition each problem.

HW/SW Specs:

The target embedded systems platform can be either the AlteraDE0 FPGA platform or the

PSOC. Both devices/boards provide the opportunity to implement low-level, interrupt driven,

device drivers along with the custom hardware.

Verilog / VHDL FPGA Ingeniería eléctrica Electrónica Mecatrónica

Nº del proyecto: #32053710

Sobre el proyecto