Development of circuitry and software for an autonomous telemetry device
$1500-3000 USD
Pagado a la entrega
Task:
Development of circuitry and software for an autonomous telemetry device (hereinafter "Sensor") that measures and then transmits to a local device (hereinafter "Master") the received data via the LoRa wireless protocol.
Sensor is powered by a lithium-ion battery type "18650", Sensor includes sensors: weight, temperature, humidity, atmospheric pressure, sound, gyroscope, radio module. The task of the Sensor is to measure the data from the sensors at specified intervals and send the obtained values to the Master.
Description of work:
The Sensor measures and transmits the following data:
• Weight, temperature, humidity, atmospheric pressure, sound (FFT), battery voltage.
• Determination of position in relation to the horizon using a gyroscope.
• Wake up and send an alarm when unauthorized movement.
• Wake up and send an alarm when there is a significant (more than 10%) weight change.
Technical part and setup:
• There are 2 ways to calibrate and adjust the Sensor:
1) Using the service button, switch to the calibration mode using the LoRa wireless protocol.
2) Wired setting via UART port terminal.
• The setting includes: setting the serial number of the device, receiving current data from sensors and batteries, calibrating scales, setting the time intervals between sending data in minutes.
• The protocol of exchange with the Master (the gateway serving the device) will be agreed separately.
• Two-way communication over LoRa.
• After waking up, the Sensor should listen to tine line and if it is free to send data.
• Receive confirmation after sending.
• The number of attempts to send 3 with an interval of 1 second after going to sleep for a specified time.
Anticipate for the future:
• Connecting an additional module to work via BLE: the additional module will contain temperature, humidity, sound sensors, the Sensor will serve as an intermediate node for transmitting the received data to the Master.
• Real time clock module for setting wakeup and sending data timers, marking messages with data sending time.
• Remote software update.
• Connecting an additional GPS module with sending coordinates to the Master in case of unauthorized movement and / or significant (more than 10%) weight changes.
The composition of the equipment:
• Main microcontroller Ebyte e77-900m22s
Built on the STM32WLE5CCU6 chip, contains a LoRa module on board.
[login to view URL]
• Temperature, humidity and pressure sensor BME280
[login to view URL]
• Microphone Digital SPH0645LM4H
https://cdn-shop.adafruit.com/product-files/3421/i2S+[login to view URL]
• ADC for load cell HX711
[login to view URL]
• Gyroscope MMA8452
[login to view URL]
Nº del proyecto: #35685223
Sobre el proyecto
16 freelancers están ofertando un promedio de $2038 por este trabajo
Hello, I am a Researcher in Electrical Engineering with specialization in Control Systems (Linear and Nonlinear Control Systems). I have Bachelor's Degree in Electronics Engineering. My Area of Specialization is Prodcu Más
Hi There, I am a senior Ph.D. Level Expert and Have more than 5 years of experience in electronics and embedded design. I have working experience with STM32 and LoRa transceiver module as well and can make it work as a Más
We are a team of Expert Chemical Engineers having 10+ years of industrial Experience dealing with different chemicals, We have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Aust Más
Hi, I can able to help you to make an autonomous telemetry device. I understood your requirements, and can able to help you as per your requirements. I have 6 years of experience as an Embedded System Engineer. I hav Más
Good day, I have good experience in circuitry and software design and would be the best fit for your project. I can develop circuitry and software for autonomous telemetry device in a quality and timely manner. I woul Más
My team and I have the skills, experience, and resources to develop a reliable autonomous telemetry device for you. We understand the requirements of the project and have identified the necessary components and compone Más
⭐⭐⭐⭐⭐I am senior Firmware & PCB Design,Java, C#,and C++ Developer ⭐⭐⭐⭐⭐ Hello I am Inigo H. I've seriously read your post and I have understood what you need. I am sure that I can be the best developer who can per Más
Hi Almost a full description about the project, what files can i give you at the end?do you want me to ship the device to you? I can design schematic, PCB and write the firmware for you I have experience working with A Más
I have been working here since the last year ,Thanks for posting and sharing your project.I have experience in this work ,let be handle this task to me ,i am willing to start Now Just contact/Text☎ Why you Choose me O Más
YES, WE CAN DO IT BEFORE YOUR DEADLINE.............. A team of professional DEVELOPERS, ENGINEERS and Designer who work effortlessly to get 5 STARS in every project.. In Web Development we can work with: ☛Desktop: Ja Más