Detailed design drawings for mimic, screen, server and Zenon Energy Edition system

system engineer is required to create a design drawing for the system: design drawing (HLD) & (LLD) must include all the details of suggested connected design and showing the specs and name of each component, it should be presented for an enterprise company specs of the system are mentioned as below: Digital Mimic board with the following features: Functional Specifications: # The mimic board shall display the electrical network for 20 substations for Eastern Region Terminal Department based on the electrical line diagrams that will be provided by the proponent to the vendor. # The mimic board shall display normally open and normal closed breakers, and provide the operator with the privilege to change the status of the breaker from normally open to normally closed. # The mimic board shall display different colors designated for different voltage levels # The mimic board shall work on input supply of 240VAC # The mimic board shall have the privilege to add or remove components to reflect new projects in the field. # The mimic board shall have the provision to automatically produce switching programs to isolate portions of the electrical network. # The vendor providing all required cabling, and assist in the installation, commissioning, and training of the system. # One line diagram is shown in attached PDF. Two additional substation (Sub# 50 & 59) will be added to this diagram. Notes to the buyer and vendor: Attached one line diagrams are only intended to be used for procurement of Digital Mimic Board. Any misused will be subject for the customer Panel Specifications: # 86" Panel PC should be provided with 4K resolution., Long term availability., Multi Touch screen , 24/7 operation , Corei7 processor,8GB RAM, 1TB HDD Operator Work Station Specifications: # Operator work station shall be provided with Precision Tower 5820 # Intel Xeon W-2102 (2.9GHz, 4C, 8.25MB Cache, No Turbo, No HT, (120W) DDR4-2400 # Memory: 16GB (2x8GB) 2666MHz DDR4 RDIMM ECC, # Hard Disk: 1 TB, 3.5inch Serial ATA (7,200 Rpm), # Graphics Card: Radeon Pro WX 5100, 8GB, 4DP, # Dual Port 1 Gigabit Network Interface Card, Windows OS, Samsung 34" Curved Screen, Screen Size: 34 Inches , Native Resolution: 3440 X 1440 , Typical Maximum Brightness: 300 CD/M# Server Specifications: Power Edge R730 Server, Processor: Intel Xeon E5-2637 v3 3.5GHz,15M Cache,9.60GT/s QPI,Turbo,HT,4C/8T (135W) ,Chassis Configuration: Chassis with up to 8, 2.5" Hard Drives, Software RAID, up to 2 PCIe Slots (With Optional Riser) ,Memory: 8GB (2x4GB) 2133MHz DDR4 RDIMM ECC, Dual Rank, x8 Data Width ,Hard Disk: 2x500GB 6Gbps 2.5in Hot-plug Hard Drive ,Optical Devices: DVD+/-RW, SATA, Internal ,Dual, Hot-plug, Redundant Power Supply (1+1), 495W Windows Server# 2019, Standard Edition. Software Specifications: Zenon Energy Edition Server UNLIMITED TAGs, Runtime WITH direct connection to hardware (e.g. IEDs) , The zenon Energy Edition Client contains: , Alarm Areas , Interlocking , Command processing , Automatic Line Coloring (ZM-ALC incl. Transformer) , Historian (ZM-ARCH) , Extended Trend (ZM-ETM) , Recipe group Manager (ZM-RM) , Reporting (read access) Report Generator + Report Viewer zenon Logic Runtime (Unlimited Tags) , Included zenon drivers:, IEC60870-5-101/-104 driver (ZT-IEC870) , IEC 60870-5-103 (ZT-IEC870-103) , DNP3 driver (ZT-DNP3TG) , IEC 61850 driver (ZT-IEC61850) , IEC 61400-25 driver (ZT-IEC61400-25-4-C) , IEC 62056-21 driver (ZT-IEC62056), Modbus Energy driver (ZT-MODBUS_E) , Included zenon Logic drivers: , IEC 61850 Client (ST-850Cl) , IEC 61850 Server + GOOSE (ST-850SeGo) , IEC 60870 Master (ST-870M101104) , IEC 60870 Slave (ST-870S101104) Design & Engineering: Engineering activities shall include: Base Design Drawings for the above-mentioned equipment for approval, Detailed design drawings for manufacturing & construction approval, As-Built Drawings and O&M Manuals upon completion of the system. SUPPLEMENTARY REQUIREMENTS: AA MAPBOARD AND PROCESS AB DIAGRAMMATIC