Polygonstrabajos

Given: 1 Polygon Direction in Degrees (0 degrees being North) A Percentage Value. Output: 2 Polygons with the 1st polygon having the percentage 3D Area. Eg: Say the given polygon has a 3D Area of 1000m2, and the Percentage Value is 40. The 1st polygon returned should have a 3D area of 400m2 and the second should have a 3D area of 600m2. Unit should be written in Delphi ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Sel...

We need a 3D model with textures of as much of New York City as possible; based upon the actual city; not fictional...in 3DStudio Max. We will then modify it to be 15 years in the future and average 1000 polygons per average sized building. It is advisable that a system be developed for a photographer to be working in New York City and upload photos each day for the artists to create the textures from the photos and build out the city. Ideally, we will create an entire model for the section of the city that is Manhatten (the city), a map is in the included zip file. For reference, we have used Keyhole for satellite images to help verify that the photos actually match the mapped buildings in the appropriate area. IT IS ABSOLUTELY ESSENTIAL THAT YOUR BID ACCOMPANY ...

...that does the following: Sketch program that allows the user to draw lines on a graph. The graph should be setup like graph paper and have x,y lines drawn on it. A user then clicks with the mouse a starting point and drags a line to point B. A line is then Drawn. The user then creates additional lines until it meets back up with the original spot. The user can create squares, rectangles, polygons, triangles or even L shaped boxes. Basically it will be the outline of a House. Once the shape is created, you must calculate the square footage of the box. The user should be able to increase and decrease the size of the graph. The standard should be 100x100 but should be able to resize up or down. The user should also have the ability to highlight a line and change it's size ...

...variety of coverages of the Great Miami Watershed at a wide range of scales. Some of the layers to the application will include shapefiles that can be overlain on base coverages. The application will allow the user to query specific attribute information attached to the shapefile and to analyze that data in context with the base coverage. Users will also have the ability to add text, points, and polygons to a map and export the map into a PDF or JPG format for printing. The user may also save the map as a file in a view folder under the user’s login name. In addition, some of the GIS layers that include monitoring well points have dynamic external links to web applications. This allows the user to view the locations of wells and query the Microsoft SQL Server database thro...

...and trigonometric functions. However, you can also calculate an approximate distance using simpler computations. The following web sites provide the details of the exact and approximate methods: 1. <> 2. <~dunlopaj/phys/> **Required:** Design and implement a program to calculate perimeter of GIS polygons given the latitude and longitude of their vertices. Use the first approximation method reported in the first web site. The user must enter the xy coordinates of the vertices, user defines number of sides of the polygon. *** **_Your program must contain at least two one-dimension arrays to store the coordinates of the vertices. In addition, the mainline program must call functions for input,

...polygon-based drawing tool. This tool will allow the final user to build polygons and then edit and transform them. To begin the session, the user will pick with the mouse a number of vertices on the screen in consecutive order and indicate the end of the selection by selecting the first vertice again (to do this, lighting up each pixel as it it selected will help.) The program will then close the polygon, assuming the end and start points are joined. Your program should determine if the polygon is simple or not, and should fill in the polygon if it simple and should throw out all non-simple polygons. If a polygon is thrown out, the user must start again. Note, your program should manage **convex and concave** polygons. See "Deliverables" for detailed...

...then please contact the address below including the requested sample and CV. Other positions, which open, are: Experienced 3D Artists, Animators, and Modellers. 3D Modeller A typical applicant should have experience in low polygon modelling and should have knowledge of either 3DS Max, Maya or Light wave. As part of your work, you will be asked to model with a limit of around one thousand polygons. 3D Animator we seek animators who have experience in the packages mentioned above, to create fluid and seamless animations, using either Vertex or Skeletal animation methods. Texture Artist We are looking for artists who have had experience in Photoshop and can create various kinds of textures. Barrett Veldsman 2 Charles Street Mayfair London W1J 5DB barrettvelds...

...then please contact the address below including the requested sample and CV. Other positions, which open, are: Experienced 3D Artists, Animators, and Modellers. 3D Modeller A typical applicant should have experience in low polygon modelling and should have knowledge of either 3DS Max, Maya or Light wave. As part of your work, you will be asked to model with a limit of around one thousand polygons. 3D Animator we seek animators who have experience in the packages mentioned above, to create fluid and seamless animations, using either Vertex or Skeletal animation methods. Texture Artist We are looking for artists who have had experience in Photoshop and can create various kinds of textures. Barrett Veldsman 2 Charles Street Mayfair London W1J 5DB barrettveldsman@bluecr...

... 5. d. Use different colours for different polygons. Put your drawing code in the drawing function of B3 in the sample program (CB3::Draw(CDC *pDC)). Your result should show when B3 is pressed. 1. 2. 4. Repeat Task 2 with the following additional requirements. 1. 2. a. Only show the visible surface of the building. 3. b. Use Warnock’s algorithm to determine the visible surface. 4. c. Shade the visible surface using the Phong illumination model and the Phong shading model. Use a single point-light source. Parameters used in the models should be properly selected to show the specular reflection. 5. d. Use different colours for different polygons. ## Deliverables The draw...

Some old pictures have a noise in them, caused by the brand of paper being used at that time. The noise resembles a grid of hexagons. I will try to post a sample picture. Ofcourse I want to remove the noise without too much distortion. It seems to me that if a program or Photoshop plug-in were built, that offered 4;5;or 6 sided polygons of different size and strength and would bleand the polygon lines into the backround, that would be just the cat's rat. This plug-in or filter or whatever, will be used only for my personal picture restoration. No need for anything connected to the web. <> ## Deliverables 1) Complete and fully-functional working program. b) For all others including desktop software: A software installation

Computer-generated graphics consist of objects, such as trees and buildings. An object can be described by fundamental geometrical structures, which are often called output primitives. Essential 2D output primitives include lines, circles and polygons. , you will implement algorithms to display those primitives in the raster world. Specifically, you will implement algorithms to convert ideal lines and circles into sequences of pixels, fill polygons and perform geometrical transformation operations on 2D objects. the rest in zip drive more ## Deliverables Your report should be written clearly such that an educated reader who is not a specialist in this field can understand what you have done 1) Complete and fully-functional working program(s) in executable form as...

Computer-generated graphics consist of objects, such as trees and buildings. An object can be described by fundamental geometrical structures, which are often called output primitives. Essential 2D output primitives include lines, circles and polygons. you will implement algorithms to display those primitives in the raster world. Specifically, you will implement algorithms to convert ideal lines and circles into sequences of pixels, fill polygons and perform geometrical transformation operations on 2D objects.. all other . all other explaination in the zip file. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2 The drawing result of each task, and your comments or explanations...

We currently have a top quality 2D game engine, however due to the limitations of DirectDraw such as no alpha-blending (as of yet) and rotation/scaling only working on some graphics cards, and lighting effects etc. we now require a C++ wrapper to add to our engine which will allow easy blitting of 2D sprites (just like DirectDraw, but using polygons, eg, our sprite frames would be on a .bmp file and would need to be drawn just like in 2D, but by doing this we will have the power to rotate/scale/lighting/alpha-blending etc. The wrapper must also be able to draw 3D objects (with details of how to convert the 3DS Studio files for use by the wrapper). The wrapper must be very simple to use, eg. hide all the boring stuff, and just have functions such as: void CSprite3D::Draw2Di...

...method for the saving and opening of encapsulated objects which may be several levels deep. As with our last project, LineHolder, data items are currently saved or loaded using the fprintf() and fscanf() functions as we demonstrated in the initial LineHolder project. These need to be changed to implement xml as they were for LineHolder. For this ShapeHolder project, the user can input various polygons of different colors. In addition, each polygon that is input can also have zero or more parts associated with it. Furthermore, each part can have zero or more properties. For simplicity, this program treats a part property as an integer value. Thus, we have a case where we have linked lists embedded within linked lists embedded within linked lists. Also, having learned a little more...

...have been successfully tested to be compliant with input/output data structure. _Required functions are: _a) BOUNDING BOX b) CIRCLE INSIDE POLYGON c) CLUSTERING NON-CONVEX HULLS d) POLYGONS MERGE e) POLYGONS INTERSECTION f) POLYGONS ADJACENCY g) VORONOI DIAGRAM INSIDE POLYGON **_Please read carefully the attached documentation._** It contains: a) General specifications on input/ouptut data structures (single- and multi-dimensional arrays). b) Detailed specifications about each required function, with special regard to particular cases. c) Sample Access database with real-life polygons. d) Sample database readme textfile. e) Item list of available source code. **_Please DO NOT bid unless you are really serious about completing th...

...priorities of the projects features etc. I hope this gives you a good idea about the project. I will be ready to answer your questions to narrow down the specs better for you. If you need the sources place ask and I will upload ... ## Deliverables Again the MAIN issues are: - drawing of walls (need a contraint on the width of a wall, now I use a rectangle for it ...) - floor should be drawable as polygons i.s.o. just rectangles - two type of floor needed (use hash to mark them) - auto wall drawing, after adding a floor to the model in most cases all walls placed on it can be addd to the model automatically given some rules. This should save a lot of time building the model. - drawing wall details: a split view is neede here on the walls (e.g. selected in the treeview). in the ...

I am looking for a low poly 3D modeller to create various content in 3D Max to be exported as .W3D for use in Shockwave. The modeller should also create the textures needed which should be seamless where appropriate. Please give a quote for the creation of a 9 hole golf course, with each hole in a seperate file and taking up around 5000 polygons. Holes should be between par 3 and 5. Please provide examples of previous low polygon work. Experience of exporting to .W3D is useful but not essential. regards James ## Deliverables 1) Complete and fully-functional working model(s) in executable form as well as source files (.MAX, .png, .jpg etc) of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the de...

Dear Coder, Thank you for considering this project. I am an experienced ...spots...behind the main character, so we can see their wings...for reference), we are looking for Angels that look like those illustrated by Dore: <> Your goal is not as simple as creating the environment and characters. It is in creating the most detailed (artistic looking) 3D environment with characters using the LEAST AMOUNT OF POLYGONS AND MEMORY. This will be somewhat time consuming near the end of completing this project, so be prepared. Please make your bid properly. Thank you for your time. - Troy ## Deliverables All 3D files and textures in 3DStudio Max or Maya ## Platform All 3D files and textures in 3DStudio Max or Maya

compose a simple and genrate a simple 3d airplane in opengl using glut and c++. there should also be a way of moving the camera so that the airplane can be viewed from all angles The plane should be built using graphics primitves in opengl and glut ie lines, polygons etc ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others includi...

...implementing an AVLTree datastructure. I have attached a zipped file containing a fairly specific description of the required functionality. To an extent it is negotiable. For instance, if you do not think you can implement Undo-Redo, that's fine. Overall, the draw control should provide functionality similar to what Microsoft Word drawing does. No sophisticated shapes, only lines, rectangles, polygons, circles/ellipses. It should be possible to embed text by clicking with a cursor and typing (ie text field is automatically elongated with typing, and second line is added on Enter). Also essential is etch-a-sketch functionality to sketch curves with a mouse. It should be possible to group, ungroup, move around, delete, cut/copy/paste drawn objects. It should be possibl...

...each body part in a different file that if applied to the limb from a 3rd party program would texture it correctly. We will also need the list of the limbs. If needed, provide us with the proper coordinates or any information for proper texturing. The limbs will be used for animation purposes as well, so they must be created in a way that is we will still be able to provide it with animation. The polygons need to be at a reasonable rate, around 600, but must be of great quality. The 3d model must either be in (native directX) .x or (3d studio) .3ds format, and work perfectly under those formats. .x format is prefered. If you can do animation let us know what is your bid for that as well, if we accept we might give you another bid to animate the same models. ## Deliverables 1) ...

**The Task** code a project that after printing a greeting to the user which contains information about regular polygons, presents the user with a table that shows : the name, number of sides, exterior angles, sum of interior angles, interior angles, and number of diagonals for all n-gons from 3 to 10, inclusive. All values in the table are to be calculated by modular functions. After presenting the table, direct the user to input the number of sides of a polygon and the length of the sides. Use this information to calculate the perimeter and area of that polygon. Restrict the user to regular polygons with n of 3 - 10, inclusive. The user should be allowed to continue to enter polygons as long as s/he wants and should signal the end by entering the sentinel 0 for n. ...

... <>_ For all formulae shown: n - number of sides s - length of a side A - area of the polygon P - perimeter of the polygon P = n s A = 1/4 n s2 cot(180° / n) **Names of Regular Polygons** **Number of Sides Name** 3 Equilateral Triangle4 Square5 Regular Pentagon6 Regular Hexagon7 Regular Heptagon8 Regular Octagon9 Regular Nonagon10 Regular Decagon ## Deliverables **The Task** Design (to be done in class) and code a project that after printing a greeting to the user which contains information about regular polygons, presents the user with a table that shows : the name, number of sides, exterior angles, sum of interior angles, interior angles, and number of diagonals for all n-gons from 3 to 10, inclusive. All values in the table are to be

This is a program to display a scene in 2 dimensions using the OPENGL library which is called from C++. The scene should include the use of colors, polygons to represent more complex shapes, etc. The graphic need not be complex. You must have a pop-up menu that will display two options: 'redraw' and 'close' BUT THEY NEED NOT BE FUNCTIONAL. As long as the menu shows 2 options then it's ok. You must also allow the user to type an R to redraw (which will erase the existing scene and redraw it) and Q to quit. Put the name 'omar' somewhere on the graphic (corner). ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that wi...

I need two functions; 1. Function which will decompose a polygon defined by vectors in an point array to rectangles. typedef struct _tPoint_ { int x; int y; } TPOINT; TPOINT VectorsBoard[50]; All angles are 90 degrees. The polygons do not have holes. One restriction is that you can use only integer numbers. The start point of the coordinate system is in the upper left corner. The rectangles should be defined by it's top left and bottom right points. examples of polygons: __ | | | |___ | | | | |______| _____ | | | _| | |___ | | |_______| _________ |__ ___| __| |______ | | | _____ | |__| |___| 2. A function which will test if a point is inside in a polygon. Please test this special cases: ___...

...your own work and not derived from any models supplied with your program or other model which is not all your own work. The models will be used by this program at my website: This program will use the models you create to generate games characters and avatars as specified by the user of the program. These should be realistic and high detail models (say about 50000 polygons) The program will convert this to the level of detail required by the user. Each should be a single mesh but with separate meshes for eyes, each clothe item. (this is so that the program user can specify which clothes to add) Each mesh should have a texture. These should be of average appearance so that they can be customised for different games, avatars and other applications. The position of

...involved. The C++ code dynamically allocates memory, however the J2ME code will have to allocate arrays at the start. The largest rendering area should be 200x200. You only have to port the code that writes to 3 bytes in RGB order. You can skip the alpha transparency, unless it's easy to keep in there. There should be a sample app which uses this rendering class to draw random polygons. You can use the Nokia Series 40 SDK available at to get access to pixels within images. Nokia has it's own extensions allowing for this in MIDP 1.0. See the attached source code. I look forward to your bid! Mark ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) ...

...create an image in memory (not from file) - create an image structure from a file in memory - save an image structure from memory to file - output a file structure on the std console (for cgi purposes) - functions to obtain the picture's dimensions Image manipulation functions - copy/crop a rectangular area of the image - create basic shapes (lines, triangles, rectangle, circle, and polygons up to 12 sides) with the given coordinates, dimensions and color - add text of the given font (only where available on the local machine) at a given size, slope and color - functions to handle transparent pixels Compatibility - the dll must support gif, bitmap and jpeg file formats. - the dll must run in all version of windows. - the dll MUST compile in microsoft vis...

I require a number of animated 3D characters (up to 10) developed in 3D studio Max. The characters will be used in a real time 3D environment and must be low poly - range from 800 - 1200 polygons. The characters will all be humanoid, quite standard with mainly office type dress. They will be skinned in a single texture map. They will be slightly cartoonish. See the attached files for examples of what I mean. The animations will be basic 'walk' and 'wait' cycles only. If you are interested in this bid then please provide examples of similar low poly work that you have undertaken. There are a number of characters required so several different bids could be successful. When you are quoting for the work you may quote an amount for producing all 10...

...project by thursday. Here it is 1. Start by using to learn the features of "glui" subwindows and tools. will be sent to winning bidder. 2. Add some of your own control functions to the subwindows used for control. 3. Replace the sphere with a teapot 4. Add the ability to add polygons to the graphics display window. Allow for mouse entry of vertex points (x,y,0) to define a polygon, but create a flui option for rotating the polygons in the same manner as the teapot. 5. Create an object (such as a simple Robot) with at least one articulated part that can be moved using "glui" controls ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. ...

...c++. 1) Use to learn the features of glui subwindows and tools. Example is attached. Glui.h and are in the glut&glui folder. 2) add some of your own control functions to the subwindows used for control. 3) replace the sphere with a teapot 4) add the ability to add polygons to the graphics display window. Allow for mouse entry of vertex points (x,y,0) to define a polygon, but create a glui option for rotating the polygons in the same manner as the teapot. 5) create an object ( such as simple robot) with at least one articulated part that can be moved using glui controls. Please keep simple. Maybe the robot could be a box with a box arm moving nothing real elaborate. I'm a beginner in opengl this is not suppose to be re...

You have to have a knowledge of C++ and OpenGL Programming. I need to have this done by wed at 5:00 P.M Central time. Develop and implement subroutines for drawing circles and polygons (area filled or edges only) with up to 8 vertices. The fill color can be one of your choice. The routines are to be named polyf(n,& array) and circle(x,y,radius) Use the subroutines in a program for displaying polygons. Also provide a mode so that the user can put at least one of the polygons in motion (with an "on" and "off" switch). Make the program interactive with at least two input options: (1) keyboard entry of vertex points; (2) mouse entry of points. Provide pull-down menus where the user can select options. Note, the program "paint.c&q...

A program that will modify the polygons of a 3D solid object by a Boolean Subtract type operation. One of two selectable 3D objects, a sphere or a cube, will be used as the objects to be subtracted from the Main solid. The routine will use the mouse to navigate the sphere or cube over the Main solids' surface and under the surface, boring holes. The keyboard will be used to control the large solid's orientation and translation. Transparency will have to be implemented for the Main solid, in order to view the position of the sphere when it is below the surface of the Main object. The Main 3D object could have 20000 to 80000 polygons. The rendering is in Real-Time so Latency should be less than 100msec and Iteration at 30msec. ## Deliverables 1) Working Prototype f...

I need a talented artist who can model Low-Poly 3d humanoid characters containing approx. 600-1000 polygons. Currently I am in need of a modern military style character. Concept art will be provided to winning bidder. ## Deliverables 1) Complete and fully-functional working model(s) in 3ds format as well as all supplimetary files of any work done. 2) Complete ownership and distribution copyrights to all work purchased. ## Platform 3DS Max

Hi everybody, I am in need of a Matlab program that will convert a STL (standard output of any 3d cad program) to a Matlab 3d array. However, there is a specific format to the 3d array. First of all, I have a script (cad2matdemo.m, included in the attached files) that will take the vertex points of any stl or slp file and plot them in Matlab and applying faces to the polygons. The final 3d array format is such that there will be '1' where the object is solid, and '0' where is is empty space. What I need is another script that will convert the vertex and face information to this 3d array format. I have included a sample array () for you to view the structure of. I will be happy to work with somebody on this to try and make it as clear as possible. I have also in...

This is an extension of an original project posted and completed on RentaCoder in June 2002, as follows: A small MFC application (VC++6) with one view based on CScrollView. The view should be able to display GDI objects, specifically rectangles and polygons representing large objects (such as beams and columns) of up to several thousand meters (with a specific scale). The view should handle zoom in/out and scroll horizontal and vertical, and should operate in both 16bit GDI (Windows 95/98) and 32bit GDI (Windows NT/2000/XP). For very large objects with numerous component (rectangles for example), the view should use clipping for increased display/refresh performance The projects was completed and I now need to extend the capabilities as described in attached document. Upon bid accep...

...spaceship in the since I am not very good with making 3d models I am now considering paying someone to make some 3d models space ships of stargate sg-1 can use any 3d modeling program you want to make the model but if it is not lightwave 5.6 I do ask that export it to 3ds.I would require that you texture the have to be less than 2500 polygons ,points. If the model more than 900 points/ polygons I do ask that you seperate the model into several pieces so that each piece is less than 900 points/ polygons.I want practicly all models of all ships in stargate sg-1. I would also request that they be textured. The model and texture quality do not have to perfect but must be decent quality. I would request the rights to give the 3d model out for free. Since I not

...written behind the * or **. EG: * 5 p1 p2 p3 p4 ... ** 8 p1_1 p1_2 p1_3 ... ** 14 p2_1 p2_2 p2_3 p2_4 ... Polygon in color 5 from p1 to p2 to p3 to p4 ... Polygon in color 8 from p1_1 to p1_2 to p1_3 ... Polygon in color 14 from p2_1 to p2_2 to p2_3 to p2_4 ... At the beginning and at the end of each polygon should be a little ball in the color of the polygon with a variable radius. The width of the polygons should also be variable. The program should handle about 20 times the data of the attached file. The data is appended every time at the bottom of the file. I want to move through the Ion-Way like in Counter-Strike (mouse + arrow-keys). So I thought DirectX would be the best. Bye Michael (PS: only the first 3 colums of the file are important ( x - y - z ) - the fourth column i...

...the third circle on the bottom inside the rectangle,the rectangle is filled with black around the circles inside the rectangle. the over all size of the traffic sign is 200x200 pixels. The outer yellow border of the square is 5 pixels and the black border is 5 pixels. The rectanglet itself inside the yellow square is 46x130 and the lights are 34 pixels in diameter. "It might be easy to draw 5 polygons next to each other for the black border"...(it's just one of those traffic light signs), ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Compl...

hello.. i want a program that is very specific.. when i start windows it will create two polygons in the middle of the screen, my screen is 1024*768 and i want a motorcycle in the taskbar when i am pressing [alt]+[tab].. the motorcycle would helst be runnning.. humm,, if anyone knows how to do that.. please respond.. Thanx ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Complete ownership and distribution copyrights to all work purchased. ## Platform Windows32, win.9x

I need someone to create a function in Visual Basic 6.0 that helps me rotating an polygon. Here is how it should work: You enter the polygon coordinates into a function, and decide how many degrees (from 1 to 360) the polygon should be rotated. Then the function will return the new set of coordinates. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Complete ownership and distribution copyrights to all work purchased. ## Platform All Windows versions that runs vb 6.0

I need a wireframe renderer written in C++. The renderer will read in an Open Inventor-like file containing the description of a 3D scene made from polygons and polyhedra with the camera position and configuration. After all necessary transformations are performed, the resulting lines will be rasterized to pixels and written to a ppm file. The renderer should be object-oriented and well-commented. The attachment contains details about the project, sample input files, and sample images. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Complete ownership and dis...

I have developed an app that creates graphical objects. I am having problems translating the screen coordinates of polylines/polygons after resizing the object. The following is a general discussion of the implementation. Poly objects are created by collecting points with clicks the dbl click to create the object. The poly object coordinates are stored in an array. The user can select the object and move it. Each object move is followed by an update of the screen coord's by subtracting/adding the difference X,Y based on the move. Now I am trying to resize the object, translating the original coordinate of the object to the new coordinate based on the size of the bounding rectangle of the object. I have successfully implemented proper resizing when the bounding rectangle is resi...

...name will be polyOCX, and the winning bidder will be contracted to program the OCX control IN FULL! The accepted bid should entail the following: **1)** A Visual Basic OCX control compatible for use with MSVB 6.0 and the new .NET **2)** The OCX control should be able to take advantage of various Windows 32 API Calls that can change the shapes of forms (into circles, rectangles, polygons of any type, stars, triangles, and rounded rectangles,) combine regions of the screen, copy regions of the screen, super-impose regions regions of the screen, etc. (with the CombineRgn function,) take full advantage of the BitIt Function, and change the resolution of the computer's monitor. **3)** The OCX control should have 1 property: the hWnd or hDC of the form, and as ...

Hello, I need a Class to draw polygons in J2ME. This needs to work on the Nokia 7210 phone emulator. You can get a free development kit at in the Java, MIDP section. It's called the Series 40 SDK Beta. This SDK has added objects & methods to do pixel level manipulation of images. The main function will be passed the following info: 1) The fill color (RGB) 2) The border color (RGB) 3) The border width ( >= 1) 4) A pointer to an integer array which holds bezier curve coordinates. The first integer is the start point, the 2nd integer is the 1st bezier control point, the 3rd integer is the 2nd bezier control point, the 4th integer is the end of the curve. Assume the end of the previous curve is the starting point of the next curve. So the next integer hold th...

Active X Controls: 3D Wireframe mesh bound to alpha-numeric X, Y, Z, cartesian coordinates, accessable through query. Open and scroll through a 3 x 3 array of files(Accessible though lines and columns with specified delimiter. Wiremesh rotatable through 2 poles and scroll by 2 directions. Create movable polygons with cental x, y point and relative coordinate points. Property Bags to be discussed further. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Complete ownership and distribution copyrights to all work purchased. ## Platform WindowsXP, ActiveX Control, (Multiple) ## Deadline information 3 control needed by 11/10/2002 Controls delivered As VB Project to add to code.

Hello, I need an ASP/activeX solution for my ArcIms mapping system (see: ) Coder must use ESRI activeX connector and deliver a working, well-commented Active Server Page code. Overall, the code should perform the following: 1. Query a database/ESRI geocode table for countries and/or cities and draw dots/color polygons on an existing world-map table. 2. Allow drawing of up to 5 different layers, for matching countries that was queried - match this with a dynamic legend. (i.e - color each layer in a differnet color and show differntiation in legend). 3. Allow custom text to be written and drawn on the map. 4. Zoom into single country/city - if queryset returned only 1 record. 5. Allow Move/Span/Full Extent/Zoom in-out in map tools. I'm working with

I have an application in Visual C++ 6.0 MFC, which draws rectangular polygons. I need to add print/preview to the application, which will works like this: If the picture is "fit" and centered, then the print preview should be too... ## Deliverables Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. Complete copyrights to all work purchased. ## Platform Windows 95/98/2K/XP ## Deadline information Within 24 hours after bid acceptance.

An small MFC application (VC++6) with one view based on CScrollView. The view should be able to display GDI objects, specifically rectangles and polygons representing large objects (such as beams and columns) of up to several thousand meters (with a specific scale). The view should handle zoom in/out and scroll horizontal and vertical, and should operate in both 16bit GDI (Windows 95/98) and 32bit GDI (Windows NT/2000/XP). For very large objects with numerous component (rectangles for example), the view should use clipping for increased display/refresh performance. ## Deliverables Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. All work MUST be done with Visual C++ 6.0 and MFC using object oriented approach. Qu...

...Rotate these points about the y-axis, stopping at 10 or 15-degree intervals to record the new set of boundary points. When the 360-degree rotation has been completed, there will be a set of points that define the boundary surface of the object. These points need to be organized in two ways. First, each point's connectivity must be specified so that a wire frame representation may be drawn. Second, polygons need to be created to define a solid surface. 2. Test your database's connectivity table by having the program draw parallel and perspective projections of the wireframe model. 3. Add hidden surface elimination to the program. The program is to use the painter's algorithm. For the painter's algorithm to work properly you will need to find the center-point of...