Circuit board layout using PADS PCB or Altium

$750-1500 USD

Terminado

Publicado

hace casi 14 años

$750-1500 USD

Pagado a la entrega

I have a total of two new boards to be created using PADS PCB software. I have schematics created in Orcad v 16. It would be best if you are familiar with and have access to Orcad. The boards are 4 layer, of moderate density, with dimensions of 75mm x 100mm (board #1) and 250mm x 100mm (board #2). I have mechanical drawings of the boards (made in Solidworks) for you as part of the requirements. These two boards fit together as shown on the drawings. The designer of these boards will be available to answer any questions on a quick-turn basis. I will consider Altium as an acceptable layout tool if you have that instead of PADS. All of my other boards are already in PADS so I prefer PADS. In the files section, I am uploading the schematics and mechanical drawings for the two boards.

Electronics

PCB Layout

ID del proyecto: 709210

Información sobre el proyecto

38 propuestas

Proyecto remoto

Activo hace 14 años

¿Buscas ganar dinero?

Dirección de email

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto

Cobra por tu trabajo

Describe tu propuesta

Es gratis registrarse y presentar ofertas en los trabajos

Adjudicado a:

@jmatthews

I am a very experienced PADS user (15+ years). The time I list is the maximum the job would take. My quote is based on the data as presented.

$750 USD en 5 días

5,0

(1 comentario)

3,8

38 freelancers están ofertando un promedio de $901 USD por este trabajo

@adipdutt

we will do it on PADS. Regards adipdutt

$850 USD en 8 días

5,0

(11 comentarios)

4,4

@zszabo

Hi, Please see PM. Regards Zoltan

$1.000 USD en 10 días

5,0

(3 comentarios)

3,9

@ganduyantech

Please see PM

$1.000 USD en 15 días

4,9

(7 comentarios)

3,9

@amitj9

Hi, I have been working with Altium and Orcad tools since 14 years working in MNCs' like Barco and Mentor Graphics. I am also an expert in FPGA/CPLD design. Have designed complex boards from 2 layers to 12 layers.

$1.000 USD en 45 días

5,0

(1 comentario)

2,4

@sleek0

Hello, I am a PCB Designer for almost 4 years. I've done many projects, especially high-speed backplanes with EMI requirements. I use Altium Designer. I also have some beginner experience in PADS, but for this project I'll use Altium. I usually use PADS for high-complexity backplanes. For more exact delivery-time, I'll have to know what is the file-type you'll give the schematic/netlist, do you already have a layer stack-up or of you know which is the required controlled impedance for the differential signals. Thanks!

$900 USD en 15 días

5,0

(1 comentario)

2,0

@pramodkumar84

presentlly I am working with orcad tool.

$800 USD en 5 días

0,0

(0 comentarios)

0,0

@miloje984

I prefer Altium Designer as a working environment. Regards, Ivan M.

$750 USD en 7 días

0,0

(0 comentarios)

2,6

@makinmakin

See details in MB.

$1.000 USD en 20 días

0,0

(2 comentarios)

4,5

@semak

I am Electrical (Electronics) Engineer , and i currently using Altium for PCB designing I hope i can do it more easily

$750 USD en 7 días

0,0

(0 comentarios)

0,0

@AndreasDrummer

Hi. I'm professional at ALtium Designer.

$800 USD en 10 días

0,0

(0 comentarios)

0,0

@Shahbaz4PCB

I have 3 years of experience in layout , schematic and complete turn key projects of Xilinx, apple BeeCube etc. I am currently working in whizzsystems, Inc. I can negotiate it to $600. Thanks -Shahbaz

$750 USD en 7 días

0,0

(0 comentarios)

0,0

@sarfarazhusain

We are ready to work on your project. Check your inbox.

$1.000 USD en 10 días

0,0

(0 comentarios)

0,0

@MikiNoel

Hello, I can make your PCB in Orcad 16 and then to export it in PADS to have with all footprints and rats if you need them like that. If you are interested pls. let me know.

$1.000 USD en 20 días

0,0

(0 comentarios)

0,0

@ZikriyaKhanFazli

I can make the project at the cost of $550USD.

$750 USD en 15 días

0,0

(0 comentarios)

0,0

@huifengtao

HI Corwinn, I have been using PADS and Orcad as working tools for more than 8 years. I have designed many projects such as digital camera, GPS navigation system, mobile phone etc. I am familiar with high speed circuit design. Please consider me. Thanks.

$1.500 USD en 21 días

0,0

(0 comentarios)

0,0

@faraz101

I can do it in both altium and protel99se.

$750 USD en 5 días

0,0

(0 comentarios)

0,0

@ankur1911

I am already developing my schematics in ORCAD and porting the netlist generated to PADS Layout from Mentor Graphics. Have access to both of them. Would be more than happy to be part of the project.

$900 USD en 10 días

0,0

(0 comentarios)

0,0

@CDPCBDesign

Hi, I have experience designing printed circuit boards in Protel99 and Altium. I have been worked about seven years in PCB layout design and technical documentation for telecomunication and electromedical enterprises. I´d like work in this project. Thks and Best Regards.

$850 USD en 30 días

0,0

(0 comentarios)

0,0

@massouds

To play safe I mentioned 15 days to complete. Hopefully it takes less.

$800 USD en 15 días

0,0

(0 comentarios)

0,0

@apaszczak

Hello, I have experience with Altium, also I have access to PADS and Orcad. Boards would be developed in Altium Designer with consideration to EMC, if you are interested in my project please send me PM,

$800 USD en 10 días