Find Jobs
Hire Freelancers

Design injection-molded consumer electronic enclosure

$250-750 USD

Terminado
Publicado hace más de 10 años

$250-750 USD

Pagado a la entrega
Note: this project is for concept and strategy phase only - that's why I'm budgeting small - no finished design necessary; just a concept sketch and answers to high-level questions on design and cost trade-offs; followup work on full production-ready design will be determined after finishing concept and strategy phase. Plan 1 hour phone discussions. English required. Only industrial designers who have experience with insert injection molded design should bid. Application/Overview Temperature controller for charcoal/wood grills/smokers Modest volume, low cost consumer product budget See [login to view URL] for current system being upgraded Cost reduction is one goal (Current enclosure is a 3-piece off-the-shelf component with custom engraving and cutouts by CNC.) Product improvement is another goal, especially better weather resistance Must use SolidWorks 2013 in English Features for consideration Splash resistant Mounting insert feature wall mounting or stand mounting 3 buttons Menu, down (-), up (+) Silicone keypad or other water resistant alternative 4 jacks – located on front/bottom such that controller can sit on table or hang/mount vertically near smoker DC in, 2.1mm ID barrel female Fan output, 2.5mm ID barrel dc jack 2 temperature probes, 2.5mm mono headphone jack Inserted clear lens for 2 line x 16 char LCD – 20x68mm aperture Modern professional styling Marking for buttons and jacks Marking for branding Product ID label Allow 6-7 sq inches on PCB for circuit/non-mating parts Help select parts mating with enclosure: 4 jacks, LCD, buttons Character LCD 2 lines x 16 character, parallel interface Prefer tactile buttons 2-piece, top and bottom Boss and pin design to hold PCB without screws 4 threading screws to fasten top and bottom Jacks recessed for splash resistance Input files available 3D models of the jacks are available from the manufacturers I found an LCD model that looks like the one we selected; dimensions just need to be verified and maybe modified.
ID del proyecto: 5082077

Información sobre el proyecto

14 propuestas
Proyecto remoto
Activo hace 10 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
Adjudicado a:
Avatar del usuario
Hi, I have thoroughly read your requirements and believe that i can deliver exceptional results. i hope you will consider using my services. I am an Industrial designer+engineer and I work with solidworks. I have 3 year experience in solidworks I have already done many projects which have gone for production. I can help you in doing all your model-in solidworks and will complete all work at the earliest possible time. Will be providing you the cad file in STL , OBJ and also proper engineering drawing so that you can get in manufactured.... I will also be providing you with superior rendered images as well.. Kindly go through my previous projects in freelancer and the feedback/rating I got after successful completion. Perfect work guaranteed I can share my best portfolios if you are interested. Few other Works [login to view URL]
$500 USD en 4 días
4,9 (12 comentarios)
5,1
5,1
Avatar del usuario
Greetings, This is Bassem Quraim, a mechanical engineer with 7 years of experience in industrial design, 3D CAD, and modeling, and I am interested to work with you on this project. I will be working with Solidworks for modeling and render with Keyshot for realistic renderings. As a mechanical engineer, I will be putting manufacturability into consideration while designing, knowing that all parts will be injection molded. Thanks for your clear description, I understand the project specifications and requirements. Please check my portfolio from this link: [login to view URL] Will be waiting for your reply. Regards, Bassem.
$300 USD en 15 días
4,9 (60 comentarios)
6,1
6,1
14 freelancers are bidding on average $562 USD for this job
Avatar del usuario
A proposal has not yet been provided
$750 USD en 8 días
5,0 (26 comentarios)
5,8
5,8
Avatar del usuario
I think this project is just for me, because I have many years of experience working with plastics, tools for their work, I have worked with a variety of devices in different conditions. Furthermore count on the assistance of experts in electronics and electrotechnics as I myself have extensive experience in these areas. I use SolidWorks 2014 in English.
$740 USD en 10 días
5,0 (27 comentarios)
5,0
5,0
Avatar del usuario
Dear Sir, Have you already found someone to work with you in this project? I will be glad to apply for it, as I can work on your concept for the injected enclosure. We can discuss my bid and also the deliver time. I can also create all the parts (using SolidWorks) that go inside the enclosure and manage them do fit in the best positions. I'm creative and precise in my work. To know me better, I'm a Electromechanical Engineer, experienced in mechanics. I have a large experience in engineering conception and R&D of new products and technologies. Besides that, I have 9 years experience in SolidWorks 3D modeling and also for 2D technical drawings. I'm sure we can work together to achieve your goals, as fast as you want. Please visit my profile and see my portfolio. If you need some more information about me and my skills, feel free to contact me. I will be waiting also for more details on your project. Just for remark, I can start the project right now and I work really fast and accurate. Best regards, F. Casimiro
$500 USD en 4 días
4,1 (10 comentarios)
5,2
5,2
Avatar del usuario
Hello , i have more than 6 years experience in the plastic parts design industry and plastic mold design , i can design the plastic parts using NX, Solidworks , Autodesk inventor providing all assembly drawing ,and checking mold-ability of t plastic parts i can design the required molds using NX moldwizard or Imold software considering all plastic parts design considerations (wall thickness , ribs, fillets and radii , shrinkage factors ....etc) if you provide more information regarding the polymer material and injection machine i can simulate the injection process regarding mold filling , packing , cooling and warpage using moldflow or moldex3D to ensure the sounds of the molds
$555 USD en 15 días
4,2 (5 comentarios)
3,8
3,8
Avatar del usuario
Hello I am a drafter designer with over 20 years of experience most of which is in the mechanical/electrical fields. I have a bachelors of engineering in Mechanical engineering and full access to auto desk inventor and solid works with over 10 years experience with both. I also have Autocad 2013. I have used Autocad in 2D and 3D for over 20 years. This looks like a very straight forward but challenging project that would be a lot of fun to design.I have developed many enclosures over the years for may different applications and i also was involved in sourcing materials and suppliers for those enclosures. I also love to BBQ so working on this project would be a big bonus for me as well! I am based in the USA and would be available at any time night or day to discuss this with you by email phone or Skype. I look forward to hearing from you and discussing this project more in the near future if selected. Sincerely, Mike
$333 USD en 7 días
3,8 (1 comentario)
2,4
2,4
Avatar del usuario
Good afternoon, In my experience plastic injections molds are a tricky thing to nail down. My company has over 10 years combined experience in industrial design (just check out our portfolio) and while usually we do larger runs of pieces being produced we understand the fundamentals and what makes a good mold design work. I fully understand your requirements and understand you have many questions of the cost benefits of different facets of the mold design, where you can trim costs to save and where the cost in the design should be invested. I can help you with this and can complete a concept drawing pointing out where, what, and why for mold features. If you have any questions, comments, or would like to set up a time to talk over the phone please feel free to contact me. Thank you, Baslr Engineering
$638 USD en 7 días
5,0 (2 comentarios)
0,6
0,6
Avatar del usuario
Aucune proposition n'a encore été fournie.
$555 USD en 3 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Over 10 years experience in plastic injection molds. Eight years in electronic design. I can offer a good solution. I hope your contact for more details. Best regards. RV.
$444 USD en 7 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
We have been in business since 1988 ans use Solidworks exclusively for all our project. We want to be your designpartners...
$688 USD en 3 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Non hai ancora fornito una proposta
$555 USD en 3 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de UNITED STATES
Ocoee, United States
4,8
10
Forma de pago verificada
Miembro desde ago 15, 2012

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.