Find Jobs
Hire Freelancers

Do some 3D Modelling

$15-25 USD / hour

Cerrado
Publicado hace casi 10 años

$15-25 USD / hour

I need a CAD or similar designer to develop a modular set of panels to create geometric sculpture. These modules need to be completed so they are interchangeable and modular. I am requesting: 1) Work hours between 9pm and 12pm GMT +1 time. (Hours are sensible since this is the only time I have to chat if needed) 2) Good knowledge of the English language (mainly written) (It is necessary for the designer to understand what I want) 3) Knowledge in Injection molding or experience in this field. (All parts will be done using injection molding) When replying to this job offer I require the bidders to answer all the below questions. Replies like see my portfolio or we are ready to start will be disregarded, I will not even read their profile. The questions are: 1) Country where you are? 2) Are you available between 9pm and 24pm GST +1 time? 3) Knowledge of the English language? how well? 4) Do you have experience with injection molding procedures/design? 5) Are you creative? 6) Do you have a portfolio? The bid is not important, the selected applicants will receive a pdf with some indications of the work required, the final quote will be defined at that point.
ID del proyecto: 5955844

Información sobre el proyecto

28 propuestas
Proyecto remoto
Activo hace 10 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
28 freelancers are bidding on average $22 USD /hora for this job
Avatar del usuario
Hello! I am interested. Working in AutoCAD and 3ds Max. I am from Serbia, available between 9pm and 12pm GMT+1, can read and write English (finished over 100 projects here on freelancer.com on English), not experienced in injection molding (posses extensive experience in 3D modeling), not specially creative, posses portfolio here on Freelancer. Hope to hear from you. Best regards!
$20 USD en 10 días
4,9 (237 comentarios)
7,4
7,4
Avatar del usuario
Hello sir, Here is the my answers to questions 1) Country where you are? Iam from INDIA 2) Are you available between 9pm and 24pm GST +1 time? Yes, i can available 3) Knowledge of the English language? how well? Good, i have good exposure to work with international clients. 4) Do you have experience with injection molding procedures/design? yes i have good experience in injection molding, more than 12 years in injection molding. 5) Are you creative? yes 6) Do you have a portfolio? refer my completed projects. I have few questions. 1-How big is your project 2-Could you send further details 3-How many hours i need to book for your project and since when you want to start this project. i have total 17 years of experience in design and manufacturing, my expertise is product design, plastic mold design, 3d printing. my skype id is udayd751 Thanks
$21 USD en 20 días
4,7 (150 comentarios)
7,4
7,4
Avatar del usuario
Dear Sir, I understand your project and very much interested to do this. I am experienced Design Engineer and excellent in Pro e, Catia, Unigraphics, Solidworks, Auotdesk Inventor 3D Modeling, 3D Printing, Assembly Design, Mold Design, Sheet metal design, Detailing and many domain work. I will provide you 3d model, assembly bill of material, detailed drawing with tolerance analysis. All task provided within time and higher quality. Please see my portfolio and start further discussion. I am sure you will find best solution regarding your project. Thanks
$15 USD en 20 días
4,8 (120 comentarios)
6,5
6,5
Avatar del usuario
Hello, I am a mechanical engineer with a lot of experience 20 + years. Solidvorks work with since its inception. I am an expert in plastic injection molding and casting of aluminum. I can develop not only 3d models, but also tools for injection molding of plastic. "Country where you are?" - Bulgaria "Are you available between 9pm and 24pm GST +1 time?" - I am GMT +3. I will be available between 8pm - 23pm - your time. "Knowledge of the English language? how well?"- I think, very well. "Do you have experience with injection molding procedures/design?". This is my job from 20 years. I am an expert in this field. "Are you creative?" - Yes, who know. "Do you have a portfolio?" - Yes, see it. I hope you choose me. Greetings from Bulgaria! Plamen Vekov
$15 USD en 20 días
4,9 (68 comentarios)
6,0
6,0
Avatar del usuario
Hello, You are offering very interesting work, so I would like to take a chance to get it. There are answers for your questions: 1) Country where you are? I live in Moldova. 2) Are you available between 9pm and 24pm GST +1 time? I hope you meant 12pm. It suits me well. 3) Knowledge of the English language? how well? I have a good knowledge of English (both writing and speaking) and I have some experience of working with English speaking employers. 4) Do you have experience with injection molding procedures/design? I had long experience with modeling and manufacture forms for vacuum press and for RTM technology. 5) Are you creative? I am creative, responsible and well organised person. I can work well under the pressure and I have excellent ability of learning new techniques. 6) Do you have a portfolio? You can see my portfolio here: https://www.freelancer.com/u/roundPx.html Best regards, Iurii
$15 USD en 1 día
5,0 (9 comentarios)
5,5
5,5
Avatar del usuario
Dear sir, we contact you to offer our services as 3D designers. We are a design office with over 10 years of experience in 3D representation. You can check our online portfolio. 1) Country where you are? We are located in BARCELONA - SPAIN 2) Are you available between 9pm and 24pm GST +1 time? YES 3) Knowledge of the English language? YES how well? ADVANCED (WE CAN ALSO COMUNICATE IN ITALIAN AND GERMAN) 4) Do you have experience with injection molding procedures/design? UNFORTUNATELY NOT. 5) Are you creative? WE ARE INTERIORIOR DESIGNERS AND ARCHITECTS 6) Do you have a portfolio? YES, WE CAN ATTACH IT IF YOU SEND US A MESSAGE HERE ON FREELANCER, THE SYSTEM DON'T ALLOW US TO ATTACH A PORTFOLIO WITHOUT HAVING A COMUNICATION WITH YOU. If you have any questions please contact us. It would be a pleasure to work on your project. With best regards. Barbara W2b Team
$20 USD en 20 días
4,8 (16 comentarios)
5,6
5,6
Avatar del usuario
Dear Sir/Madam I use Autocad, MDT, Inventor, Solidworks, Catia. models for 3d and 2d detail drawing I could and was able to analyze the FEA, motion study, rendering, analyze kinematic and many more to see my work visit the portfolio please send me a message for more information and I will give an example for a project that you created thank you salute Ramdani
$15 USD en 5 días
4,3 (28 comentarios)
4,9
4,9
Avatar del usuario
Hello , i have more than 6 years experience in the mechanical design field utilizing CAD/CAM applications using Most sophisticated software NX, Solidworks,solidcam, Autodesk inventor providing manufacturing drawing using ISO Standard and providing necessary GD&T applying my mechanical background experience in various industrial application such as Consumer product design ,machinery design , Tooling design , sheet metal fabrication and mold design---------------------------------------------------------------------------regrading your questions :- 1-iam from egypt 2-yes i can be available on the mentioned time 3-very good English knowledge written and spoken 4-yes i have more than 6 years in the injection molding and plastic industry 5-yes 6-this is my portfolio"http://www.freelancer.com/u/amrelsayed.html"
$16 USD en 12 días
4,3 (10 comentarios)
3,9
3,9
Avatar del usuario
A proposal has not yet been provided
$22 USD en 1 día
5,0 (5 comentarios)
2,4
2,4
Avatar del usuario
I can assure you 100% accurate work within the required time frame. I'll fully dedicate to this project and deliver on time with quality. Kindly consider my BID and give a chance to serve my skill. I can share my previous work for your assessment. Thanks, Priyank
$17 USD en 28 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Dear Client Refer your project description, please find below my responses. 1) I live in Lahore, Pakistan 2) I will be available between 3pm to 7pm GMT +1. (if that is acceptable, however I am available through Freelancer Messenger all the time) 3) I am proficient at spoken and written English 4) I have experience of planning and execution of injection moulding design and fabrication of the mold. 5) Yes, I can think out of box. 6) I have portfolio of only one project of producing a sliding dimmer for resistive heater for an American client. I have get its CAD/CAM design prepared (outsourced), developed the PCB inside the dimmer (outsourced), and assembled the two (outsourced). I hope my qualification and experience will fit your requirement. I look forward to listen from you, soon. Regards, S.A. Mujtaba
$24 USD en 1 día
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Greetings employer, I am from Bosnia and Herzegovina and I believe we are in same time zone so I am available but I spend some time on university. My English knowledge is very good. I study on faculty of mechanical engineering so I have met with injection molding and I know how it is working but I wonder why do I need to know it if I am going to model finished part? Geometry of the part maybe? I am creative when I need to find solution for a problem, less if it is for looks. I don't have portfolio. Kind regards. PS: I want to improve my knowledge and skills, so can you really answer me that about molding?
$16 USD en 30 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Dear hiring manager, Over the last four years, I have been working as a Mechanical Engineer, 3D Modeler 3D models and detailed drawings. I want to share my proficiency in Solidworks and Autocad at the same time help clients achieve their goals by providing high quality CAD services at reasonable price to gain customer's satisfaction and establish great working relationship. Services Offered: Mechanical engineering design 2D Drafting (Part and Assembly) 3D Modeling/Design/Rendering/Animation Solidworks simulation Answers for your questions : I'm Sri Lankan, and my English knowledge is good. I have experience in molding design, I have a portfolio Best Regards! Anuradha Dewruwani
$20 USD en 20 días
0,0 (1 comentario)
1,1
1,1
Avatar del usuario
To answer your questions: 1) Current location in Manila with design team of 3 people. 2) Yes, I am available between the specified time. 3) Lived in Australia for 26 years, hence very high level of English. 4) Personally I have over 8 years of injection moulding experience. From Refrigeration parts, Mobile devices, Consumer goods ( camera, telephone housing) to shelving and retail. 5) I have a creative team that will guarantee to satisfy your requirements. 6) We have a portfolio that I can email you. Our design service revolves around 1 key element and that is quality of work. We aim to satisfy clients to ensure their success in the marketplace. At designer4me, we believe that quality is far more important than cheap labour. When investing in moulds that can often exceed $10K, clients almost always prefer to ensure stress / issues free results to reduce development time and additional costs. Our motto: "Do it right to the very last detail" If you wish to trial our service, I am more than happy to offer you some free initial hours to ensure you are dealing with the right people. You can contact me via email on rpar at designer4me. com. Alternatively you can call me on +63 906 238 4919. I look forward to hearing from you and I am excited to kick start our design collaboration. Kind Regards, Raymond Par
$66 USD en 40 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
A proposal has not yet been provided
$15 USD en 25 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Buona sera, Scusi per il mio italiano ma sono ancora in il mio primo corso (nivelo a1). As you can see in my profile, I am an engineer with experience in mechanical design and CAD currently developing projects with Solidworks, Solidworks simulation (to simulate the injection) and Catia V5. Answer to questions: 1. Spain. 2. This time is perfect for me. 3. I have lived in Seattle for one year and I work for CNH, where English is the official working language. 4. Indo have experience in plastic parts design, injection procedure can be modeled also but at the end this will depend on injection company procedures. 5. Yes I do, I use to solve all design problems that I face with. 6. Not complete, but you can see my porfolio here in my profile. I hope that my profile could be interesting for you. Waiting for your news, kind regards.
$24 USD en 10 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
A proposal has not yet been provided
$16 USD en 1 día
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Dear Sir/Madam, Thank you for posting this job opportunity. I am interested to take up this job. I have 11 years of experience in design and development of plastic and sheet metal components. Please find below the answers to your questions. 1) Country where you are? INDIA 2) Are you available between 9pm and 24pm GST +1 time? YES 3) Knowledge of the English language? how well? EXPERT LEVEL 4) Do you have experience with injection molding procedures/design? YES 5) Are you creative? DONE PRODUCT DESIGN FOR PUMP PRODUCTS 6) Do you have a portfolio? YES. Look forward to work with you. Regards Gopinath
$20 USD en 3 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de ITALY
Livorno, Italy
5,0
10
Forma de pago verificada
Miembro desde dic 14, 2006

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.