The Acid cleaning skid consists of the following major component:
Batching Tank : Sized with a working volume of 1000 liters including a flat sloped bottom head, with cleaning connection/low point drain; on one side of the tanke these is a small hopper connected with a sliding valve to allow safe handeling of solid acid through to the tank.. Tanks has a side level indication to enable operator reading level for ease of operations and tank filling.
Batching Tank Agitator: A standard motorized mixer with fixed speed agitation.
Transfer Pump: Designed to satisfy a 30 gpm at a pressure of 25 psi (assuming
water-like properties). The pump operations is controlled via start/stop buttons by the unit
operator, and is guided/protected by the specified minimum level defined by a low level switch.
All this is installed on a structural Skid with hard piping.
the 3D model shall show the Control Panel for the pump and Tank motor.
The following Drawings are required as a deliverable from the 3D model:
System schematic drawings.
General Arrangement Drawing
3D package assembly (If requested added cost).
attached is a schematic for the tank not with relevant dimensions.
34 freelancers están ofertando el promedio de $154 para este trabajo
Hi, I have made something like your project for Liquid Pump on 3D animation video, and I'm sure I can do it in best quality. Please feel free to talk to me if you have any questions or want to see my works.