Air Ventilation CFD using Ansys Workbench Software -- 2

I am an Aerospace Engineer with MS in Computational Fluid Dynamics and Aircraft design. I have an experience of 4 year in for Simulation and Analysis using CATIA and SOLIDWORKS. I had done many project including detailed design modelling of aircrafts on catia and plane maker for analysis and turbo machinery components for Ansys Analysis. Some of them are mentioned in my portfolio. You may share details of your work. We can discuss further about your task in chat. Feel free to contact me any time. Looking forward to working with you. Skills: - Product Design, CAD/CAM, Mechanical engineering, Structural engineering. - Solidworks : 3D Modeling, Assembly, 2D Drawing, Analysis in Ansys

Hi, My name is Ishwar, I am a Mechanical Engineer with many years of experience using FEA and CAD tools. I can do it in ansys. Please open a chat so that we can discuss it more. I will do my best to complete your project perfectly with high responsibility and passion. You will get wonderful results. Thanks in advance, Ishwar

Hi Greetings! I am a Mechanical with expertise in CFD. I can use both SolidWorks and ANSYS Fluent for CFD. I have done projects that include CFD of vertical axis wind turbine to optimize TSR, CFD of jet engine compressor for recovery of wake region, Design of wing to optimize lift, etc. Given my experience of CFD projects, I believe I am the right person for this project. For this project, I will use SolidWorks for 3d Modelling and for CFD I will use ANSYS Fluent. Along with CAD and analysis files, I will provide a rich technical report explaining the results and steps involved. Kindly contact me to discuss further. Regards,

Hello sir/ma, I'm interested in taking this task up for you. I am a Mechanical Engineer with a masters degree with 7yrs experience in Mechatronic, FEA, Hydraulic actuator, Matlab,3D Modelling, CAD/CAM, AUTOCAD, CFD, NX Nastran, CATIA, Fluent ANSYS, Graphic Design, Product Design, Solidworks and expertise in simulation-based numerical optimization. I believe I am a good fit to complete your project. Once you share the project, I will have a look & confirm if I can do it. I’m honest, creative and a unique person to carry out your tasks given to me. Leaving your project on our hand is privileged; we'll make sure that the project is done in a perfect way and do our best until you satisfied. I would love to discuss this project with you and meet your exact requirements. I am confident I can provide you with top-notch materials that will fit your needs. I'm proud my work on being professional, of the highest quality and always delivered on time

Hello. Please take a look my portfolio related to ANSYS CFD of warehouse and there are a lot of other examples. I would like to know next thing: do you have cad geometry of classroom, what would be a heat sources in room, haw ventilation will be made by fan or natural convection, just give me more information. If you have any questions do not hesitate ask me.

Hi there, I am an Aerospace Engineer with MS in Aerospace CFD (Computational Fluid Dynamics). I have an experience of 3 years working with Government and private organizations. I have studied Turbomachinery, Aero Vehicle Design and Computational Fluid Dynamics as my core in MS program and have successfully completed several projects related to CFD and turbomachinery. Few examples are "Design and analysis of centrifugal Compressor and high pressure turbine for a turbofan engine", "Analysis first stage of turbine exposed to UHTs", "Design and analysis of fan Compressor" and several other projects. All these projects are done in ANSYS with ICEM CFD as the meshing tool while Fluent as the solver. I have also formulated generic MATLAB and FORTRAN codes for AVD of different aircrafts and conduction, convection, diffusion, advection and convection-diffusion problems which involve solving heat transfer problems by incorporating efficient numerical techniques. I have also been working on ANSYS Fluent and CFX for past three years and have good experience working with the simulations of turbomachinery. All the projects are in my portfolio. I can share with you the list of projects I have completed and you can have a look at my portfolio as well for further details. Feel free to contact me any time. Looking forward to working with you. Thank you!

Hey.... I am glad to see the CFD evaluation of room using ANSYS fluent because it is the area of my expertise for which you may look at my portfolio. I have carried out a lot of projects on Fluent. My offer would be covering following 1. Literature review 2. 3D model preparation model setup in ansys 3. Meshing and boundary conditins 4. Analysis 5. Results discussion conclusion 6. references. I will make a report of approx 2000 to 2500 words and 2 revisions Please have a loook on my portfolio and inbox details so that i can start with your project Customer satisfaction and timely delivery is my foremost priority along with long term professional relation.... Regards

Hello sir, I am mechanical engineer I did similar job before I can show you previous task I can also help with Solidwork, Autocad, Ansys, 3d modelling, 2D drafting, FEA, CFD, CAD/CAM, CNC programming, mechanical engineering. waiting for your message.

I am mechanical design engineer by profession and graduate in mechanical engineering with PG in CAD/CAM, ANSYS & SolidWorks. I have experience of manufacturing design and product design. I can perform almost all kind of simulation like CFD, FEA, structural analysis etc. I have expertise in many design tools like COMSOL, SolidWorks, ABAQUS, CATIA, ANSYS, 3DMax, Creo MATLAB etc. Also we have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.

Hello Dear Concern, We are a team of professional members of Electrical, Electronics, Telecom, Mechanical, Civil, Chemical, Energy, Industrial Engineering. We are also expert in following softwares: Embedded system, PCB DESIGNING, ARDUINO, ESP, MATLAB, Simulink, PADS, PORTEL,Proteus, Cadence ,Solidworks PCB, ANSYS, ABACUS, AUTOCAD, DipTrace, Kidcad, MATLAB, SPSS, PRO/E, CATIA V5, Stud pro, Homer Pro, We are trusted people and will never break you trust. We will deliver your work with in your defined timeline. I assure you that your work will be error free and 100% professional with high quality. We will never waste your time and money. We will try over best to make you proud. Please consider me for this job. Thank you in advance. Regards,

I am CFD engineer with several years of CFD practical experience in similar projects. I would like to make an offer for your project. Let me know if you are interested. Regards, F. Saric

Dear sir or madam, I worked on Engineering with ANSYS (CFD) very hard since 6 years ago. Your project needs a deep understanding about the field. Client satisfaction is my highest priority. If you are not satisfied with my work, you may not pay for it. A short-chat can bring us together to the success of the project.

Hi, Apart from my academic qualifications with B.Sc. in Mechanical Engineering and M.Sc. in Aerodynamics and CFD (PARIS), I have worked on CFD codes such as elsA (CFD code used by Airbus France), DLR-TAU (CFD code used by German aerospace industry), Gerris, Star CD and Ansys FLUENT. I formed SAVIYURU AEROSPACE primarily to engage in aerospace related aerodynamics and CFD projects, but now we are diversified into all kinds of airflow simulations, including ventilation, drying and dust collection systems. I have also worked in the building services industry and designed and over-seen the erection of HVAC systems and fire protection and suppression systems. Currently I am doing a somewhat similar project on freelancer.com to simulate CO concentration inside a truck loading bay. So I believe I have the perfect profile for this project. I had a quick look on the video, and it looks quite straight forward. I will use Ansys FLUENT for this project and any geometry modelling will be done in CATIA V5. If you need to change these, we can discuss. If the time duration is too much, we can negotiate. Do you already have the 3D solid model? Or should I create it? What are the deleverables you are looking for? A report? Plots? I am keeping the milestones to be agreed upon later when we have more information on the project. Anticipating a positive reply, Thank You

Hello sir, I have read your project details about your assignment and watched the video, and i can do the job and supply all results needed and write a report about it. please contact me for more info and start working on it at once. I'm mechanical engineer with experience in mechanical design and simulations using ansys and solidworks, and have great knowledge about HVAC systems and worked with HAP and REVIT

Hi, I am interested in this project. I have 6 years of experience as a CFD Engineer. I had done over 200 projects like Car park ventilation, Building HVAC CFD, Car park fire safety CFD, Building thermal CFD projects, Datacenter thermal ventilation and all types of CFD projects. I had done 3 DATACENTER ventilation projects in Ansys. If you wish i can show in chat. Refer my portfolio too. Please feel free to contact me.

If you share the CAD model, I can find application opportunities in a short time. So when you choose me, I'll be it's job done.

My name is mahmoud Here to help;I am a professional engineer in solid works. With real work experience in all technical matters

I am working in heat treatment furnaces manufacturing company. I have experience in designing and CFD analysis of the furnace auxiliary components. I will do your project.

I have simulated aaround 50 cfd simulations of various physics such as heat exchangers, external aerodynamics , hvac simulations

Hi, I have a PhD in Aerospace Engineering with extensive experience in using ANSYS for conducting air circulation simulations in a room. I can conduct the simulation for you in a desired room geometry. I will also provide the report with data analysis.