I have a property (semi-detached) that has three pitched roofs connecting together. If you were standing in front of the unit you would see the roof on the left has a 24" overhang/soffit with a short 8 foot eaves attached to the fascia. The rain run off from the center roof and the roof on the right both run into the short wall under the left roof. Needless to say this is a very bad roof design that has lots of ice build up and is guaranteed to leak after 8 years or so, no matter which roofing system is used.
I would like to get rid of this problem by connecting all three roofs together and creating a low slope/flat roof at the intersection of the three, with a short 4-5 foot eaves on the new overhang where all three roofs will terminate.
I would need to have a structural engineer design the roof change using cad, etc., to properly size the lumber, etc. so I could do it myself. I would also need the drawings with all indicated lumber sizes, dimensions, angle cuts etc, to complete the job myself and/or put it out for tender in case I could not do it myself.
22 freelancers están ofertando el promedio de $432 para este trabajo
Hello! I'm interested in your roof project. I have 10 years design experience. Here is an example: [login to view URL] Please contact me for any questions. Thanks. Artsakh!
Hello dear, I am a M.Sc. Structural engineer. I am expert in structural design and drawings so I can help you for sure in your task and I will provide the required design drawings in the required time. Thanks.