Find Jobs
Hire Freelancers

An electronic device and PCB layout designed

$30-250 CAD

Cerrado
Publicado hace más de 8 años

$30-250 CAD

Pagado a la entrega
I have an idea for a small, simple device. The device will light an LED and start a programmable timer when it's orientation is tilted, and when the timer expires it will shut off the first LED, and light a second one. Resetting the circuit will be performed either by tilting the device back into its neutral position, or by way of the activation of a momentary contact switch. In the case of the use of the switch, resetting will zero and restart the timer. The device should draw virtually no power in neutral position, and minimal power in its active state. I'd like to use a long lasting, relatively inexpensive, small form factor battery. The maximum size of the board will be 8cm x 5cm. I'd like the schematic and PCB layout designed, and provided in a standard format for manufacturing.
ID del proyecto: 8353057

Información sobre el proyecto

24 propuestas
Proyecto remoto
Activo hace 8 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
24 freelancers están ofertando un promedio de $156 CAD por este trabajo
Avatar del usuario
hi sir i am an expert electrical engineer i can do it for you i have almost 7 years of experience in this field i assure you quality work and on time delivery please reply to discuss it further regards
$126 CAD en 3 días
4,8 (169 comentarios)
7,5
7,5
Avatar del usuario
A proposal has not yet been provided
$147 CAD en 7 días
4,9 (28 comentarios)
7,0
7,0
Avatar del usuario
Hello! How are you? Nice to meet you! I want to help you and I think I have the perfect skills! Send me a message to talk more about your circuit! Have a nice day1
$150 CAD en 5 días
5,0 (63 comentarios)
6,6
6,6
Avatar del usuario
I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department FAST National University Pakistan. I am also continuing my MS degree in Electrical Engineering with specialization in Control. I have taught the followings courses, and also supervised Projects related to these subjects. 1. Control System Design & Modelling (Matlab & Simulink) 2. Digital Logic Design (Verilog, VHDL) 3. Digital System Design (Verilog, VHDL) 4. Computer organization & Assembly Language (8086 processor, 8051 controller, Arduino, PIC) 5. Electric Machines Design and Analysis 6. Circuit Analysis and Design 7. PCB Design (Proteous AREAS + Multisim Ultiboard) I assure you, if you assign your project to me, you surely gonna work with me in future.
$200 CAD en 3 días
4,8 (152 comentarios)
6,7
6,7
Avatar del usuario
A proposal has not yet been provided
$155 CAD en 3 días
4,9 (74 comentarios)
6,3
6,3
Avatar del usuario
Hello, Have a great day. My name is Shahbaz and iam running a setup for prototyping Electronic devices. We will ship you a fully working prototype. All of the design files will be handed over as well. Please note: due to policy matter, Courier company will not allow the batteries to be shipped. We will provide you link for battery purchase (from EBAY). Please feel free to contact. Best Regards, Shahbaz.
$250 CAD en 25 días
4,7 (36 comentarios)
6,4
6,4
Avatar del usuario
Hello Sir, I went through your project proposal and it's very interesting and I would like to work on this project. Why you should hire me ? * I have four year experience as a freelancer and I am very efficient. * I have many good feed backs. Please visit this link and see for yourself some of my feedbacks on freelancer.com https://www.freelancer.com/u/Anthony989.html * I can support you if you are willing to mass produce this as a product. I have many contacts in China. *I work full time as a freelancer and I will work as planned,on time. Please contact me if you are interested. I am keenly waiting.
$150 CAD en 3 días
4,7 (33 comentarios)
6,1
6,1
Avatar del usuario
Hi, Microcontroller based Embedded product designer and developer. We can provide the solution, with a small sized, low cost microcontroller interfaced with a accelerometer module. Hoping to hear more from you. Warm Regards, Geo
$130 CAD en 7 días
4,8 (7 comentarios)
5,9
5,9
Avatar del usuario
Hi I am interested to this project. I am familiar with electronics, PIC microcontroller as well as PCB design by eagle. Thanks.
$98 CAD en 5 días
4,8 (68 comentarios)
5,6
5,6
Avatar del usuario
A proposal has not yet been provided
$150 CAD en 2 días
4,6 (13 comentarios)
4,7
4,7
Avatar del usuario
Hi For the bid amount entered, you will get a complete schematic, pcb layout and CAM files for manufacturing anywhere as well as firmware. For a little more, I would readily make you a complete professional prototype and mail it to your physical address so that you can test it yourself and if all is well send over the CAM files for manufacturing. This is usually a better way as improvements usually come about once a working prototype is at hand. Regards Soumitra
$166 CAD en 10 días
4,8 (1 comentario)
4,4
4,4
Avatar del usuario
using PIC micro controller we can develop an device that able to do your algorithm its not that difficult project i can start next Saturday
$246 CAD en 3 días
5,0 (6 comentarios)
4,1
4,1
Avatar del usuario
I will design the system and deliver Schematic. Bill of materials and source Layout Gerber Firmware All documentation
$155 CAD en 3 días
5,0 (9 comentarios)
3,9
3,9
Avatar del usuario
A proposal has not yet been provided
$100 CAD en 3 días
4,6 (14 comentarios)
3,9
3,9
Avatar del usuario
Hello, i'm Daniele Cortellazzi electronic engineer. I'm working as hardware developer, for you project i have some idea to arrive fast to a product. I use the freedom board developed by freescale, for your project we can use the FRDM KL05 where there is an accelerometer for detect the tilt and an RGB led. In short time i can develop the firmware and test it on the FRDM board, after that i can design the pcb. The consumption is very low with this micro, we can use a botton battery for power supply all the system.
$277 CAD en 7 días
5,0 (1 comentario)
2,7
2,7
Avatar del usuario
I am an electrical engineer specialized in electronics and communication and also working as instructor in University.I have very good expertise in circuit designing , digital design, communication system etc. I am also Lab instructor in University and have conducted Labs of Circuit design, Digital design. I have also supervised many projects related to Electric and Electronics circuits, Digital design and microcontroller Based Circuits.
$100 CAD en 3 días
5,0 (6 comentarios)
2,3
2,3
Avatar del usuario
Hello, I am professional prototype engineer with 6 years experience in big automotive company. I work on Eagle CAD. Looking forward to working with you!
$155 CAD en 10 días
5,0 (2 comentarios)
1,3
1,3
Avatar del usuario
Hello Sir, Don't worry, I am a Electronic Engineer. Do you want Chip ATMEL (arduino) or PIC (microchip). if you think to make this product massively, I recommend microchip or Atmel without Arduino. I am available to start in this moment.
$155 CAD en 3 días
5,0 (1 comentario)
1,1
1,1
Avatar del usuario
A proposal has not yet been provided
$55 CAD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hello i want to take my first project on this site, so my price is low. But i am a very experienced electronic designer. I will create the project with all necessary files for producing it everywhere. I have been developing boards for medical and industrial applications. Also i have many projects with smart technologies.
$100 CAD en 5 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de CANADA
Canada
0,0
0
Miembro desde ago 28, 2015

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.