Ingeniería de Edificios Jobs

Dispongo del plano de planta de una casa unifamiliar y necesito el paquete completo de cómputos métricos. En concreto requiero: • Cálculo de áreas detalladas de todas las habitaciones y zonas comunes. • Dimensionamiento de las instalaciones eléctricas, incluyendo cuadro de cargas, secciones de conductores y protecciones recomendadas. Entrego el plano en formato digital para que puedas extraer la información base. Prefiero resultados en un informe PDF acompañado de la hoja de cálculo original y, si es posible, archivos CAD con las capas y mediciones etiquetadas. Tomando en cuenta las normas venezolanas.

I’m adding a detached garage to my home inside the City of Houston and need complete structural + civil engineering support. Architectural elevations and electrical layout already complete. Scope The project covers a new ground-level, wood-frame detached garage that must tie into the existing driveway and drainage and meet all City of Houston codes and wind-storm requirements (140 mph, Exposure B). I’ll rely on you to produce sealed drawings, all supporting calculations, and potentially also guide me through the city’s electronic permitting portal until the permit is issued. Key Deliverables • Signed and sealed architectural/structural set: foundation, framing, roof, connection details, wind bracing, and shear wall schedule • Civil site plan: grading, d...

I need to reinforce my wooden floor to safely hold a 125-gallon aquarium. The aquarium will be placed on the ground floor of my residential home. Key requirements: - Reinforce existing wooden floor - Ensure safety and stability for heavy load - Experience with structural modifications is a plus - Knowledge of aquarium weight distribution is beneficial - Aquarium will be placed along outside load bearing wall. Please provide a detailed plan and cost estimate.

Time is tight on a new project and I need the full AutoCAD and structural package turned around quickly. The core requirement is to prepare clean, accurate drawings in DWG that can go straight to the architect and the site team without further red-lining. Depending on how you prefer to work, the workflow may involve 2D drafting for plans and sections, 3D modelling for clash checks, blueprint sets for permitting, and the supporting structural calculations—analysis, load paths, and reinforcement notes—so let me know where you are strongest and we can prioritise the sequence. Please keep revision windows short; I need the first draft inside three days and the final package signed off no later than one week after that. Make sure your work aligns with the relevant local building co...

Hello, I am looking for a licensed New Jersey Professional Engineer to evaluate an inground vinyl pool wall collapse in South Jersey. The contractor drained all of the water out of my inground vinyl pool during work in 2025. The pool wall later collapsed, leaving the pool unusable and causing major damage. My homeowner’s insurance claim was denied, and the denial referenced poor workmanship. I am trying to determine whether fully draining the pool, improper workmanship, soil pressure, hydrostatic pressure, or failure to properly protect the pool structure contributed to the collapse. Because I am working with limited funds, I would like to start with the most cost-effective option first, such as an initial consultation, site inspection, or limited written opinion letter. If neede...

I’m ready to move from finished architectural plans to a fully engineered SIP (Structural Insulated Panel) home and need a licensed structural engineer who lives and breathes SIP construction. The project is residential, so all calculations, details and inspections must comply with the latest IRC and local amendments. Here’s where your expertise comes in: I need you to convert my completed drawings into a full SIP design package, stamp-ready. That means panel sizing, load-path analysis, connection detailing, and all structural calculations required by the building department. Once the plans are submitted, I’ll also rely on you for the formal inspections and final approval sign-off, ensuring field installation matches the engineered intent. If you’re comfortable wo...

Looking for a draftsman to re-draw what i already have but make it more professional and with add developments that will help me get council approvals. Container 40 ft long on one side, carport on the other side. There is a drawing attached to what I want.

I have several hand-drawn structural sketches—mostly of building elements—that now need to be rebuilt in AutoCAD and delivered as clean DWG files. Every line, dimension and annotation must match the originals with engineering-grade accuracy, so I can move straight into analysis and detailing without redrawing anything. Because the set covers more than one structural type, I expect separate model spaces or clearly organised layers so each system is easy to isolate. I have no predefined drafting standard to follow, therefore I will rely on your recommendation for lineweights, layer naming, text and dimension styles that align with common professional practice. Deliverables • One DWG file per sketch (or logical grouping) with layers, blocks and annotation fully editable ...

I need conversion of engineers' drawings into fabrication drawings for an aluminium shelter product intended for commercial use. Requirements: - Accurate conversion of engineering drawings - Adherence to local building codes - Experience with aluminium fabrication - Proficiency in relevant design software Ideal Skills: - Background in structural or mechanical engineering - Familiarity with commercial shelter specifications - Attention to detail and precision I need this project completed ASAP.

I'm seeking a qualified engineer to create scaled site plans for a commercial property, specifically for a drive-thru coffee trailer. The plans must meet Nashville zoning approval standards (they are specifically asking that the plans include showing that 5 vehicles (20 foot long assumption) can queue on the property without blocking the street and that there is a 12 foot wide by-pass lane and include a Professional Engineer (PE) stamp. Ideal candidates should have experience in commercial site planning, zoning requirements, and PE certification. I already have CAD scaled plans. I need an expedited timeline if possible.

I need a structural engineer to review the roof and ceiling structure /foundation of my four-season sunroom addition plans. Needs to have North Carolina seal Ideal Skills and Experience: - Expertise in structural engineering - Experience with residential sunroom additions - Knowledge of roofing and ceiling structures - Ability to provide quick, accurate assessments Please provide your qualifications and relevant experience. Needs to hold a NC seal

I’m moving forward with a commercial project in North Carolina and must have a professional who already holds an active North Carolina license. Because the site is zoned commercial, every phase has to be signed off by someone whose credentials the inspectors recognize, so please confirm your license number and discipline when you respond. At this stage, the detailed scope is still being finalized, but the core need is straightforward: step in as the licensed professional of record, review the current plans, work with the county-provided list for permits, and carry out or oversee the onsite work to keep us code-compliant from start to finish. If your license covers general contracting, electrical, plumbing, or another specialty that typically touches commercial fit-outs, you’re...

Existing TI Project in California on a 1950 Shed roof mono-pitch building have comments. It needs revise and response to City reviews. Source file is DWG.

I’m ready to move from finished architectural plans to a fully engineered SIP (Structural Insulated Panel) home and need a licensed structural engineer who lives and breathes SIP construction. The project is residential, so all calculations, details and inspections must comply with the latest IRC and local amendments. Here’s where your expertise comes in: I need you to convert my completed drawings into a full SIP design package, stamp-ready. That means panel sizing, load-path analysis, connection detailing, and all structural calculations required by the building department. Once the plans are submitted, I’ll also rely on you for the formal inspections and final approval sign-off, ensuring field installation matches the engineered intent. If you’re comfortable wo...

I need expert advice on creating a 300x300 mm penetration in a concrete floor for installing a kitchen exhaust system. The ideal freelancer will have professional experience in concrete cutting and ventilation installations, ensuring the penetration is done safely and precisely. Please provide details on your experience and any similar projects you've completed.

I need a structural engineer to assess two decks on my manufactured home. Requirements: - Confirm that the decks are not load-bearing - Provide load calculations - Visual inspection of decks which are untouched for a long time Ideal Skills & Experience: - Licensed structural engineer - Experience with manufactured homes - Strong analytical skills for load calculations - Thorough inspection skills Please provide relevant credentials and experience in your bids.

I am adding a mezzanine-style balcony inside an existing commercial space and need full design and construction-ready plans. The new level will serve as an additional seating area and must carry the vibe of a modern speakeasy/cabaret—think clean contemporary lines, subtle theatrical lighting positions, and finishes that feel both intimate and upscale. You would take the project from concept sketches right through to permit-ready drawings. That means confirming the structural approach, laying out stairs and guardrails to code, detailing connections to the current frame, and illustrating material and lighting intent so contractors can price and build with confidence. I would also like a simple 3D model or a few rendered perspectives to show stakeholders how the balcony integrates with...

I need an experienced professional to manage the permitting process for my new home and provide ongoing advice during the design and planning phase. Key Requirements: - Manage obtaining building permits, as well as permits from sanitary and water departments. - Advise on getting city building and engineering departments' approvals. Ideal Skills and Experience: - Strong knowledge of local permitting processes. - Experience in dealing with city building and engineering departments. - Excellent organizational and communication skills. Your expertise will ensure a smooth permitting process and help navigate the complexities of city approvals.

I'm seeking a skilled illustrator to create a house extension that includes a porch/vestibule and a rustic-style wooden veranda. Requirements: - Porch/Vestibule: Designed primarily as a mudroom but also a sunroom. - Wooden Veranda: Crafted in a rustic style may consider traditional style. Ideal Skills and Experience: - Experience in home extensions - Expertise in rustic-style woodwork - Strong design and construction skills - Attention to detail and quality craftsmanship Please provide examples of similar work done.

I need an experienced contractor to add and install LVLs (Laminated Veneer Lumber) on my residential property. The LVLs will be installed both interior and exterior, serving both structural support and visual aesthetics. Key Requirements: - Assess structural needs and design for visual appeal - Professional installation of LVLs - Ensure compliance with building codes and regulations - Clean up and remove debris post-installation Ideal Skills & Experience: - Proven experience with LVL installation - Strong understanding of structural engineering - Familiarity with residential building codes - Attention to detail and quality workmanship Looking forward to your bids!

I’m ready to send you the complete CAD model for our first project—a 10,000 sq ft luxury residence—so you can take it from architectural concept to fully engineered structure. My in-house designer has the plans nailed down; what I need now is a structural specialist who can move quickly, meet local building code requirements, and provide clear construction-ready documentation. job responsibilities include • Full foundation design, sized and reinforced for site conditions • Beam and column layouts with member sizing and connection details • Comprehensive structural drawings (your primary deliverable) *Stamped plans set for local Austin Texas USA Permit submissions Everything has to align with the local code set; if you’re already fluent in those...

I’m finalising the permit set for a repair to residential home in Wisconsin and need a licensed structural engineer to prepare sealed drawings and accompanying load calculations for the wood rafter system. The roof framing is a straightforward, code-compliant (standard) design—no custom geometries or prefabricated trusses—yet the county will only release the permit once they receive engineer-stamped plans. Scope of work • Analyse dead, live, snow and wind loads per current Wisconsin Uniform Dwelling Code and ASCE 7. • Size and specify all wood rafters, ridges, hips, valleys, collar ties and connections. • Provide clear span tables or calculation sheets showing governing load combinations. • Produce construction-ready drawings (PDF + DWG) stamp...

I'm looking for an experienced professional to help change the existing house plan for the entire first floor. Key Requirements: - Move the main entrance into the house - Structural changes needed (walls, doors, windows) Ideal Skills and Experience: - Expertise in architectural design and structural modifications - Proven experience with residential projects - Strong understanding of building codes and regulations - Ability to create functional and aesthetically pleasing layouts Please provide a portfolio showcasing similar work and a detailed project plan.

I need CAD drawings for the replacement of three decks on my house in Quechee, Vermont. The new decks should be made of composite material and feature wire-type metal railings. The three decks in place are: 1. Main deck off living room (roughly 30' by 16'). Deck is one story above the lower side of the house (it's on a hill). Will add a new stone patio below the deck; need stairs from deck down to patio. No stairs now. 2. small deck off the master bedroom (same, downhill, side of house as main deck). 3. ground level deck on back side of the house (slightly smaller than main deck). Ideal Skills and Experience: - CAD drawings expertise - Experience in deck construction and replacement. - Proficiency with composite materials. - Attention to detail and qualit...

I'm seeking detailed CAD designs and drawings for the exterior of an existing building. The plans are primarily for renovation purposes, focusing on architectural features. Key Requirements: - Accurate documentation of current elevations - Detailed drawings for planned renovations - Emphasis on architectural features Ideal Skills & Experience: - Proficiency in CAD software - Experience with building renovations - Strong understanding of architectural design and details Please include relevant experience and a portfolio with your bids. Building is interval 23000 sq ft

I need a structural engineer to assess wind loads on reinforced CMU walls above 20 feet in a commercial building. Requirements: - Analyze current wind load - Determine if additional bracing is needed - Provide detailed report with recommendations with PE Stamped Calulations Ideal Skills: - Expertise in structural engineering - Experience with CMU walls and wind loads - Strong analytical and reporting skills Please include relevant experience in your bids.

I'm looking for a detailed home inspection before I make an offer. The inspection should cover: - Structural integrity - Electrical systems - Plumbing systems - Roof and attic conditions - Insulation and ventilation Ideal Skills and Experience: - Certified home inspector - Experience with structural, electrical, and plumbing assessments - Knowledge of roofing and insulation/ventilation systems - Attention to detail and thorough reporting

I have an empty backyard and clear city guidelines—I now need a professional set of drawings that turn my ideas into permit-ready plans for an in-ground, freeform swimming pool. Here’s what the layout must show: a flowing, irregular footprint that feels organic rather than geometric, a dedicated waterfall feature that blends into the coping line, and a built-in spa area seamlessly integrated into the main shell. All dimensions should be to scale and include surface elevations, equipment pad location, plumbing runs, and any electrical stub-outs the contractor will need. Please deliver: • A detailed site plan in PDF and DWG that I can hand straight to my local building department • A separate sheet with hydraulic and electrical schematics for the waterfall and...