Tradestation easylanguagetrabajos
1) Dollar Bars in Tick Blaze. – These are already coded and use the threshold X as a Fixed Number. i.e. a new dollar bar is generated when 1000,000(user defined) dollar value is crossed. However I need the programmer to use the Fixed number for the first 30 days and once there is more than 30 days of data on the chart then X = Rolling 30 Day Average of 1 Day's DollarValue/ 50 , See attached file called Tick Blaze_Dollar Bars. It already includes most of the code. The part which needs coding says *** ATTN to Programmer *** 2) Communicate the Current Paper Trading Strategy’s Market Position for a Symbol in Tick blaze to Multicharts. Multicharts can receive this information only via DLL, or any other method you suggest. Latency between information send between Multicharts a...
I would like a an entry/exit program built in Tradestation to repeat stop in and out entry/exits that activates and repeat at certain prices until I turn it off.
Hi I am looking for someone good with TradeStation. I will share more details through chat.
I am looking for code to facilitate order entry for my Easy Language trading systems. I want to have my system send an OSO order to TradeStation's servers and have that buy or short order have attached or imbedded in it at least three and preferably five exit orders. Assume I develop a signal to buy gold at $1,903 and want to place a stop for 60% of my position at $1,897 and the remaining 40% at $1,888. I also want OCO take profit exits tied to my position at $1,947 and $1,997. Finally, I want to have an OCO order in place to close any existing position at 15:48 on Friday to avoid weekend exposure. It is essential that all this order information be included or imbedded within the initial order so that I am not at risk of power outages or internet connectivity losses and my risk relat...
Build TradeStation indicator to compare candle sizes and display information/ alert when the event occurs - on Momentum Chart. Should have knowledge of momentum charts and candlestick patterns. Should be able to use the indicator in Scanner. Inputs: Compare candles - 2 Allowance in body variance during compare- % Allowance in tail variance during compare -% Rightmost candle - Green/Red Left Candle - Red /Green
Good Day, I am looking for someone who can convert an indicator that I have built in Thinkscript language (Think or Swim) into EasyLanguage (Trade Station) Thank you.
Hello. I have a fairly simple pinescript indicator that I would like converted for use in both thinkscript and easylanguage. Thanks. Here is a link to the study on Tradingview.
It's a short strategy (approx. 45 lines of code) which I need converted from PineScript (tradingview) into EasyLanguage(Tradestation). The code should run on Tradestation afterwards. This is a first project of a number of similar projects, which I need translated from a good programmer.
This project is to write a script (for a scan) in EasyLanguage or Python: The scrip will identify stocks with "Positive Divergence." If you plan to use Python, please mention this in your response. The more specific criteria is as follows: 1. Scans for / identifies stocks that have Positive Divergence at the close of trading for the day (the American stock markets). 2. Positive divergence happens when these two events happen on the same day [Events (a) and (b)]: (Event "a") Stock price made a lower-low (intraday / during the trading day). Detail: The "lower low" is defined as the lowest-low for the past one month or 30 days. The lower low is based on intraday lower-low of the day (today). i.e., the "lower-low is not based on the closi...
A freelancer that can write code in Tradestations system
The alghorithm I am looking for is to find in the history of stock chart similar bar changes given 5 bars back from the current one . For example, lets say in a 5 min bar chart of a stock named ABC the last 5 bars did move up $1.03 // now , down $1.5 //5 min ago , down $0.25 // 10 min ago, up $0.85 // 15 min ago and $1.00 // 20 min ago. So, ...the current one . For example, lets say in a 5 min bar chart of a stock named ABC the last 5 bars did move up $1.03 // now , down $1.5 //5 min ago , down $0.25 // 10 min ago, up $0.85 // 15 min ago and $1.00 // 20 min ago. So, this algorithm should identify each time the exact same price change for each bar in the sequence order with the last bar being LIVE. (Python language, Thinkscript or EasyLanguage ). See attached picture for clari...
Por favor, regístrate o inicia sesión para ver los detalles.
I am based in Houston and my Partner, Andrew Haney, is based in London. We have two other guys working with us developing Algorithms for our trading strategies. David is based in Ohio, and he is a TradeStation (our trading platform) expert with deep knowledge of everything TradeStation(TS). Sujith is based in the South of India and has extensive knowledge in Easylanguage, which is the native language of TradeStation. Sujith also has a lot of experience back-testing in the TradeStation environment. So, that is our current Team, and we need your help to take certain “Tick Data” feed into an excel Spread Sheet to perform filtering of raw signals to improve the Signal to Noise ratio. We believe that entails some relatively simple averaging filters...
We are a start-up seeking to use TradeStation as a platform for options and equity trading. We need to be able to identify purchase candidates and then upload orders in bulk (with stop loss and stop gain orders) coupled with the ability to change orders as needed. We have prepared specifications (as we have backtested our strategies).
I have been using Tradestation last few months, it works but it has its limitations. So I want to build this with python, to allow me to trade options, stocks, futures, and crypto. Able to backtest and optimize. I want to eventually connect this to Interactive Broker and Coinbase, or other brokers. Is there advantage to building this in Quantconnect (Lean) so that it’s easier to backtest and optimize? Ideally, I don’t want to rely on Quantconnect if I don’t have to. But I am open to your ideas. This is a strategy that uses multiple indicators and multiple timeframes. It is set up in such a way that I included a list of indicators that I would use but I can decide which one to use or not use to create various strategies with different user inputs within the overall ...
I have a Thinkscript indicator that i want in easy language. The indicator uses ATR Stop Loss +Fib Extension to generate Buy/Sell Signals
I need tutoring to learn how to create an API on TradeStation/TraderView to manage different trades. Prefer language is Python.
Por favor, regístrate o inicia sesión para ver los detalles.
I like to test ideas out constantly. I'd like to run strategies and optimize parameters on individual markets, but also baskets.
Hello. I have 2 custom indicators Im using in Thinkorswim and wish to switch to Tradestation to automate the strategy, which is a very simple strategy where the 2 indicators simply need to line up, PDF included of explanation. The one indicator is called True Momentum Oscillator, the other Trend Magic, but Im only using one of the three timeframes in trend magic, which is the 3 minute. I have the rules and Thinkscript code outlined in the attached PDF, and Im brand new to Tradestation and dont know how their auto trading setup works. Ie, once the indicators are coded, do I then need an additional code to combine the indicators to execute the strategy? If so, I would need that code as well.
Hi Alexei K., I noticed your profile and would like to offer you my project. I need help coding a very simple strategy in Easy Language on TradeStation, with an entry based on RSI and exit at specific price which is adjusted on every bar. Would you be interested? Thank you in advance. Regards, Artur
Convert Indicator from ninjatrader NT8 to Tradestation easylanguage then build radarscreen statistical results I have attached ninjatrader NT8 indicator which it plots dot swings zigzag (top , bottom) of candles based on major parameter (span). *** First thing is to convert this NT8 indicator to tradestation easylanguage. Then I need to use this tradestation indicator (you build earlier) to build statistical table in radarscreen based on the logic below: if you see the dots in the indicator you see that it identifies tops/bottoms like a zigzag (waves of ups and downs). I need to have a parameter in the radarscreen version which is the number of dots to be considered in our statistical wave calculation (say X : the last 2000 waves or 3000 or 4000 o...
Hi Barend G., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I would like to know if its possible to create custom DLL and send HTTP Request (API POST) for EasyLanguage
Hi Alexei K., I need to modify a simple breakeven strategy in Tradestation. Maybe add a couple of sentences to the Easy Language? Are you able to help with this?
would like to make some modifications to a trading strategy in Tradestation Easy Language. Let me know if this something you can do, and how much it would cost. #1. I would like to add TradeQuantity. I would like to risk a fixed amount of dollars on every trade, whether the range from the high to the low of the SAR is 5% or 1%. For example, In the screenshot below, I would like the risk to be based on the difference between the buy entry, and where the SAR would be positioned for a stop-loss should the trade trigger. In this case, the entry at $35.00, subtracted by $34.53 would be $.47. If I wanted to risk $100, ($100 / $.47) = 213 shares. The important thing though, is that the share count adjusts after every bar. The previous bar, the SAR was at $35.04. If it would have triggere...
would like to make some modifications to a trading strategy in Tradestation Easy Language. Let me know if this something you can do, and how much it would cost. #1. I would like to add TradeQuantity. I would like to risk a fixed amount of dollars on every trade, whether the range from the high to the low of the SAR is 5% or 1%. For example, In the screenshot below, I would like the risk to be based on the difference between the buy entry, and where the SAR would be positioned for a stop-loss should the trade trigger. In this case, the entry at $35.00, subtracted by $34.53 would be $.47. If I wanted to risk $100, ($100 / $.47) = 213 shares. The important thing though, is that the share count adjusts after every bar. The previous bar, the SAR was at $35.04. If it would have triggere...
I would like to make some modifications to a trading strategy in Tradestation Easy Language. #1. I would like to add TradeQuantity. I would like to risk a fixed amount of dollars on every trade, whether the range from the high to the low of the SAR is 5% or 1%. For example, In the screenshot below, I would like the risk to be based on the difference between the buy entry, and where the SAR would be positioned for a stop-loss should the trade trigger. In this case, the entry at $35.00, subtracted by $34.53 would be $.47. If I wanted to risk $100, ($100 / $.47) = 213 shares. The important thing though, is that the share count adjusts after every bar. The previous bar, the SAR was at $35.04. If it would have triggered this bar instead, ($100 / $.51) = 196 shares. As the range gets sma...
Por favor, regístrate o inicia sesión para ver los detalles.
I have multiple projects to convert easylanguage strategies to pinescript tradingview or NT8 that I need recoded to work on other trading platforms and one strategy that needs to be converted from NinjaTrader 7 to 8. Currently using Multicharts and Tradestation but want to move old strategies that have worked good for me to other platforms that support connections to Crypto Exchanges and automated trading.
this is a brief strategy (about 20 lines of code) which uses the ADX as part of the algorithm. I need an experienced Tradestation (Easylanguage) programmer who can make sure the strategy works the same in TS as it does on Tradingview. it is basically looking for the pivot highs of the ADX indicator but it needs to work 100% like in Tradingview otherwise useless. here's code
Hi Looking to convert the attach script from pine script to tradesation easylanguage. Please let me know if possible, and which parts of the code cannot be converted. Thanks in advance
Hi Looking to convert the attach script from pine script to tradesation easylanguage. Please let me know if possible, and which parts of the code cannot be converted Code will be send in the chat Thanks in advance
...percentage of the range. For example, in the screenshot posted, the range is $.47. Being able to set the profit target at 75% of the range for example, ($.47 * .75) = $.3525, Price to buy = $35.00 + $.3525 = $35.25 Profit Target. Being able to set the stop-loss at 25% of the range for example, ($.47 * .25) = $.1175, Price to buy = $35.00 - $.1175 = $34.88 Stop-Loss. Is this possible to do within the Tradestation Strategy Code? Thanks....
Hi Alexander B., you had written me a Tradestation strategy in the past, here is another job i would like: https://www.freelancer.com/projects/coding/Build-simple-Tradestation-Strategy/details
...next bar. Short entry logic in reverse obviously. Looking for simple and easy to understand coding with explanation notes inside code… Variable = InsideBar_Expiration Variable = Highest_Lowest_Bars Variable = Trix_Lenght The variables to be applied to short and long entry are the same Coding must the compatible with Tradestation 9.5 you can just forward the coding in a text file or provide a unprotected eld file. If in text file I can verify that in Tradestation myself. ...
this is a brief strategy (about 20 lines of code) which uses the ADX as part of the algorithm. I need an experienced Tradestation (Easylanguage) programmer who can make sure the strategy works the same in TS as it does on Tradingview.
...percentage of the range. For example, in the screenshot posted, the range is $.47. Being able to set the profit target at 75% of the range for example, ($.47 * .75) = $.3525, Price to buy = $35.00 + $.3525 = $35.25 Profit Target. Being able to set the stop-loss at 25% of the range for example, ($.47 * .25) = $.1175, Price to buy = $35.00 - $.1175 = $34.88 Stop-Loss. Is this possible to do within the Tradestation Strategy Code? Thanks....
Convert Indicator from ninjatrader NT8 to Tradestation easylanguage then build radarscreen statistical results I have attached ninjatrader NT8 indicator which it plots dot swings zigzag (top , bottom) of candles based on major parameter (span). *** First thing is to convert this NT8 indicator to tradestation easylanguage. Then I need to use this tradestation indicator (you build earlier) to build statistical table in radarscreen based on the logic below: if you see the dots in the indicator you see that it identifies tops/bottoms like a zigzag (waves of ups and downs). I need to have a parameter in the radarscreen version which is the number of dots to be considered in our statistical wave calculation (say X : the last 2000 waves or 3000 or 4000 o...
translate approximately 100 lines of Pinescript code (very straight forward code) to EasyLanguage. See below half the code as an example.
Por favor, regístrate o inicia sesión para ver los detalles.
I need about 100 lines of PineScript translated/converted to Tradestation. It is fairly straight forward, nothing complicated. Who can help?
Hi M. T., I noticed the job you did connecting TradingView to Tradestation. I would like to hire you for an hour of consulting at your prescribed rate. My goal is to understand what is required to get the two to interface together in a way that allows the autotrading features of Tradestation to work with webhook alerts on TradingView. If the skill required is beyond the scope of my abilities I may need further assistance.
...messaging (RabbitMQ), task management (Airflow), micro services (Docker), system auditing, deploy automation, log management, database management (MongoDB, SQL), Python scripting, data analysis (Pandas, Scikit-Learn), etc. We prefer hires with knowledge of Centos (Linux Distro) for remote servers, terminal/bash, crontab, systemd, SSH and SCP, Python 3.0, NumPy, TensorFlow, Click, IQfeed, CQG, IB, TradeStation, and especially Rithmic’s API. Should have: • Python 3.0 and C++17? • executing multiple tasks (generalist) vs. one task (specialist)? • Python libraries - Pandas/Scikit to analyze data, NumPy, asyncio, websockets, pika, Scikit-Learn, Tensorflow, matplotlib, seaborn? • tools - Jupyter, docker (-compose, -swarm), rabbitMQ, MongoDB, SQL, Airflow, Cel...
Por favor, regístrate o inicia sesión para ver los detalles.
easylanguage tradestation, complete a code with easylanguage
i need a back test code with easy language, using two charts
I would like to create a webhook for my Tradingview strategy that connects to Tradestation for automated trade execution.
I would like to automate my Tradingview strategy by creating a webhook to send my orders to Tradestation.